Overview
The Icon Suspension rear hydraulic air bumpstop system, part number 56103, is a bolt-on rear kit for the Toyota Tacoma. Icon’s manufacturer fitment list covers 2005–2017 Tacoma models in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims. Icon designed it to improve on- and off-road control when the suspension uses its full travel.
The Icon rear hydraulic bumpstop uses a linear-digressive piston, where a standard bumpstop is linear-linear. The tuning gives smooth engagement, more bottom-out resistance and a controlled return rather than the abrupt stop of OEM rubber. A selectable install height keeps up travel when a thicker aftermarket leaf pack is fitted later.
The unit is designed for demanding use. Its valve stack, oil volume and nitrogen pressure can be adjusted, and it is user serviceable.
Key features
- Bolt-on design that uses existing holes in the frame, with no cutting or welding
- Toyota Tacoma specific tune for bottom-out resistance and smooth engagement
- Selectable install height so up travel is not lost when leaf pack height changes
- Linear-digressive piston with adjustable valve stack, oil volume and nitrogen pressure
- Anodized billet top cap, O-ring sealed back-up cap, seal head and striker
- Urethane rod seal and wiper; user serviceable
Setting install height
Bumpstops act only at the end of suspension travel, so they affect how a truck feels when it is pushed hard through ruts, whoops and landings. A progressive piston that softens the first part of engagement can keep the axle from slamming into the frame, while still controlling the final stroke. That matters most on trucks that use the full travel regularly.
Install height is the setting to think about when the leaf pack changes. A thicker aftermarket pack raises the rear and can use up bump travel before the stop engages, so the bumpstop position should be checked against the new pack height. Re-check the setting after any suspension change, and make sure the driveshaft and brake lines clear the axle at full compression.
- Measure the leaf pack height before setting install height
- Re-check clearance after changing springs or shocks
- Look for oil seepage around the rod seal during service
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 56103 |
| UPC | 70000651435 |
| Position | Rear |
| Fitment type | Direct fit |
| Piston | Linear-digressive |
| Body finish | CAD plated, described by Icon as corrosion free |
| Top cap | Anodized billet with O-ring sealed back-up cap |
| Seal | Urethane rod seal and wiper |
| Install height | Selectable |
| Adjustments | Valve stack, oil volume and nitrogen pressure |
Vehicle fitment
It fits 2005–2017 Toyota Tacoma models, including Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims. It is a Tacoma direct fit rear part.
It does not cover 2018 and later Tacoma models or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- The unit bolts on using existing holes in the frame, and no cutting or welding is needed.
- Choose the install height that matches your leaf pack so up travel is not limited.
- Support the rear axle securely before removing the stock bumpstop or the new unit’s mounting hardware.
What’s included
The kit is a rear hydraulic bumpstop unit with a selectable install-height feature.
Not included: Confirm the package contents before fitting, including any hardware needed for the bumpstop unit.





