Overview
The Daystar KU09016BK is a polyurethane bump stop built around Daystar’s EVS Foam, a microcellular material. It is a urethane bump type with universal fit, and no year, make, model or chassis is named for it.
EVS Foam has a true progressive spring rate, so its stiffness rises as it compresses. That lets the stop work as an active part of the suspension rather than a simple limiter. It is designed for uses ranging from racing to recreational off-roading.
Key features
- Microcellular EVS Foam construction
- True progressive spring rate
- Urethane bump type
- Universal fit listing
- Daystar part number KU09016BK
Matching a stop to your suspension
A bump stop’s real job is to control the last few inches of travel. With a progressive foam, the resistance builds gradually, so the suspension meets the stop without a hard jolt. Matching the stop to your setup starts with knowing how far the suspension travels before contact and how much room the stop has at full compression.
Start by measuring the gap between the stop and its contact surface with the suspension at rest and at full compression. Note any rubbing or pinching on brake lines, wiring or axle components. A progressive stop may change how the suspension feels near the end of travel, so recheck clearance after the first test drive.
Replacement stops should be inspected at regular intervals, especially on vehicles that see frequent full compression. Look for tears, crumbling edges or permanent flattening, and replace the stop if its profile has changed noticeably.
- Measure the free gap at rest and at full compression
- Check clearance around brake lines and wiring
- Recheck after the first drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU09016BK |
| UPC | 814423016193 |
| Type | Urethane bump |
| Foam material | Microcellular EVS Foam |
| Spring rate | Progressive |
| Fit type | Universal Fit |
Vehicle fitment
This stop is universal fit and is not tied to any year, make, model or chassis code. Verify the stop’s size and mounting against your own suspension before fitting it.
No year, make, model or chassis code is tied to this part number. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One bump stop is included. Check the package contents against your installation before starting.
Not included: Mounting brackets and hardware are not included with the stop, so plan to source them for your installation.












