Overview
The ICON Delta Joint Billet Upper Control Arm Kit, part number 58550DJ, is a billet aluminum front upper control arm kit for the Toyota Tacoma. It fits 1998 to 2023 Tacoma models in the trims named below. Confirm the exact year against your truck before ordering an earlier Tacoma.
ICON machines the arms from 6061 aluminum and finishes them with a matte anodized coat. The arms have PTFE-lined rod ends and machined adjuster sleeves that allow alignment to be adjusted on the vehicle, which ICON says allows precise caster and camber tuning.
The arms can increase wheel travel when paired with extended travel coilovers, and the added droop travel supports better performance and ride quality. The coilovers are a separate purchase and not part of this kit.
The arms use the patent pending Delta Joint, a heavy duty high angle ball joint. It has a zinc plated housing, grease seal, metal on metal construction and a greasable design, and it is designed to articulate further than a typical ball joint.
Key features
- CNC machined 6061 aluminum construction
- Matte anodized finish
- PTFE-lined rod ends
- Machined adjuster sleeves for on-vehicle alignment
- ICON patent pending Delta Joint
- Greasable joint with zinc plated housing and grease seal
Greasing and joint care
A greasable high angle joint needs fresh grease on a regular schedule, especially after trail use where water, mud or dust can reach the joint. Grease helps the joint move freely and keeps the metal surfaces protected, so skipping service can shorten joint life even when the arm itself is sound.
Check the grease seal each time the wheels come off. A torn seal lets grit in and pushes grease out, which is a sign the joint needs attention sooner. Billet arms also benefit from a look at the adjuster sleeves after alignment, since they can loosen under hard use.
- Grease the joint at the interval in the service schedule
- Inspect the grease seal for tears or dirt intrusion
- Recheck adjuster sleeve clamps after the first few drives
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | 58550DJ |
| Position | Front upper |
| Material | 6061 billet aluminum |
| Finish | Matte anodized |
| Joint | ICON Delta Joint, patent pending |
| Adjustment | On the vehicle, via adjuster sleeves |
| Fit | Direct fit |
Vehicle fitment
It fits 1998 to 2023 Toyota Tacoma models, including Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner trims.
Toyota 4Runner, Tundra and FJ Cruiser models are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adjuster sleeves allow on-vehicle alignment adjustment. After installation, have the caster and camber set to specification.
What’s included
The billet upper control arm kit. The extended travel coilovers are not included.





