Overview
The G2 Toyota FJ40 Birfield CV Style Chromoly Axle Kit, part number 98-2044-002, is a front replacement axle shaft kit for Toyota axles listed at 9.5 inches with 30 splines. G2 Axle and Gear built it for owners who run larger tires and want a stronger shaft than the factory part.
The shafts are forged from high grade alloy steel and heat treated to exceed OEM specifications. Rolled splines and Big Spline options add strength for high torque loads. The kit does not include a differential.
Key features
- Birfield CV style axle shaft design
- Chromoly construction, forged from high grade alloy steel
- Heat treated to exceed OEM specifications.
- Rolled splines and Big Spline options for added strength
- Designed for high torque applications and larger tires
Axle shafts under load
A front axle shaft carries engine torque from the differential to the hub and flexes through every turn and suspension cycle. Larger tires raise the leverage on the shaft, so the spline fit and joint condition matter more than they do on stock tires. Worn splines often show up first as a clunk on turn-in or a vibration under acceleration.
When the shaft is out, inspect the inner joint for play and check the boot for cracks or grease loss. Replace the axle seals at the same time so dirt and water stay out of the new joint. Clean the spline surfaces before fitting the shaft to avoid mismatched wear. Note any noise on the first test drive so you can trace it quickly.
- Check hub bearing play with the wheel off the ground
- Look for torn boots and grease spatter inside the wheel
- Replace seals and clips during the same job
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 98-2044-002 |
| UPC | 631410136098 |
| Axle location | Front |
| Axle type | Toyota 9.5 inches |
| Axle spline | 30 splines |
| Popular axle manufacturer | Toyota |
| Construction | Chromoly Birfield CV style |
| Includes differential | None |
Vehicle fitment
The kit covers the Toyota FJ40 by title only, with no model years or chassis code. Match your year, model and trim to the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering. Compare the 30-spline count and 9.5-inch axle type with the axle your vehicle already has.
What’s included
This is a front axle shaft kit with no differential.
Not included: differential.








