Overview
The G2 Axle and Gear 2-2025-373 is a 3.73 ratio ring and pinion for the AMC Model 20 axle. The pinion turns 3.73 times for each ring gear revolution, a middle-range ratio that gives more low-speed pulling force than a 3.31 set and somewhat higher engine rpm at highway speed.
The set fits the AMC 20 in front and rear positions. It is intended for oversized tires and high-performance engines. Vehicle models and years are not identified, so confirm the axle housing on your vehicle before buying.
Key features
- 3.73 gear ratio for the AMC Model 20 axle
- Front and rear positions listed by G2
- Ring gear and pinion supplied as one set
- Made for oversized tires and high-performance engines.
- Built with current materials and manufacturing methods.
Pulling versus cruising
A 3.73 gear sits between lighter and taller setups. It gives noticeably more low-speed pull than a numerically lower gear, which helps with trailers, steep grades and off-road crawling. Highway speed brings a bit more engine rpm, so the trade-off is some extra noise and fuel use on long trips.
Choose gears with the whole vehicle in mind. Tire size, transmission gearing and engine torque all shape how a 3.73 set feels. Larger tires make the gear feel taller, while stock tires keep the ratio closer to its intended feel. Plan test drives after the swap and keep a note of temperature and noise for later comparison.
- Tire diameter changes the effect
- Check transmission gearing before swapping
- Keep the first loads light during break-in
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2025-373 |
| UPC | 631410093681 |
| Axle type | AMC 20 |
| Axle location | Front or rear |
| Gear ratio | 3.73 |
| Axle manufacturer | AMC |
Vehicle fitment
Fitment is not tied to specific vehicles. The set fits the AMC Model 20 axle in front or rear positions, so confirm the housing type on your vehicle before ordering. Make sure the axle is a Model 20 before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3.73 set needs precise pinion depth and backlash, which is why a gear shop with setup tools is the usual route. Allow a break-in period before heavy loads.
What’s included
One 3.73 ring and pinion set for the AMC Model 20 axle, part number 2-2025-373.
Not included: Carrier bearings and shims are not part of this set and may be needed.
















