Overview
The G2 Axle and Gear 1-2021-342 is a 3.42 ratio O.E.M. series ring and pinion for GM 10 bolt 8.5 inch and 8.6 inch axles. It fits front and rear locations with a universal fit by axle type, so it is matched to the axle rather than a named vehicle.
The O.E.M. series in this 3.42 set is designed to run cooler and quieter than aftermarket gears. The gears are made under contract with original equipment manufacturers for the 10 bolt 8.5 inch and 8.6 inch housings.
Key features
- O.E.M. series 3.42 ring and pinion
- GM 10 bolt 8.5 inch and 8.6 inch axle types
- Front and rear locations listed
- Gears are built under contract with original equipment manufacturers.
- Designed to run cooler and quieter than aftermarket gears.
Choosing a ring and pinion
A ring and pinion sets the final drive ratio between the driveshaft and the axle shafts, so the numbers you pick affect how the vehicle accelerates and how it cruises. A 3.42 ratio is a numerically lower gear than many off-road setups, which means less torque multiplication at the wheels and more of the work left to the engine. Before buying, look at the tire diameter, the gearing already in the axle and how the vehicle is mostly driven. A set that suits highway use may feel slow on steep trails with larger tires.
Gear sets rarely go in alone. When the ring and pinion changes, the pinion bearings, carrier bearings, pinion crush sleeve or shim and the axle seals are often replaced at the same time, since they wear with the gears and are disturbed during setup. Ring and pinion gears must run with a matching pattern and backlash, so the old carrier should be inspected for wear before it is reused. Signs that the current gears need attention include whine that changes with load, clunking on acceleration and oil with metal fragments.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2021-342 |
| UPC | 631410092806 |
| Gear ratio | 3.42 |
| Axle location | Front and rear |
| Axle type | GM 10 bolt 8.6 inch and 8.5 inch |
| Popular axle manufacturer | GM |
| Series | O.E.M. |
Vehicle fitment
Fit is by axle type: GM 10 bolt 8.5 inch and 8.6 inch. Confirm the housing size before ordering.
Other GM axle sizes are not part of this set. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 3.42 O.E.M. gears should be set by a driveline shop before the axle is put into service.
What’s included
A matched O.E.M. series ring and pinion for the 3.42 ratio.
















