Overview
The G2 Axle and Gear 95-2019-001 is a replacement rear axle shaft for GM 12 bolt car axles with an 8.875 inch axle type. It fits the driver or passenger side and has 30 splines, so match that count on your existing axle.
The shaft is forged from high grade alloy steel and heat treated beyond OEM specifications. It suits high torque applications and larger tires, with rolled splines and better materials.
Key features
- Forged from high grade alloy steel
- Heat treated to exceed OEM specifications
- Rolled splines and better materials for high torque applications
- Big Spline options are available for larger tires.
- 30 splines on a GM 12 bolt axle
Before you pull the shaft
Removing a GM 12 bolt car axle shaft usually means taking off the wheel and brake parts first. Before you start, measure the axle type and count the splines on the old shaft, because a matching length alone will not confirm fit. Keep the old and new parts side by side to compare the ends and the spline pattern.
Once the shaft is out, inspect the wheel bearing, the axle seal and the differential side for wear or leakage. A worn bearing can load a new shaft unevenly, and oil leaking past the seal can shorten the life of the new part. Clean the mating surfaces, and check that the retainer or hub fasteners are in good condition before reassembly.
- Measure the axle type and spline count
- Compare the old and new shaft ends
- Inspect the wheel bearing and axle seal
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2019-001 |
| UPC | 631410106206 |
| Axle type | GM 12 bolt, 8.875 inch |
| Axle location | Rear |
| Shaft location | Driver or passenger |
| Spline count | 30 splines |
| Material | High grade alloy steel |
| Heat treatment | Heat treated to exceed OEM specifications |
Vehicle fitment
Universal Fit, with no make, model or years named. Confirm your vehicle’s year, model and trim before ordering.
Compare the 12 bolt axle type, 8.875 inch size and 30 spline count with your axle first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the splines and check the 8.875 inch axle type on the shaft you are replacing; this one is listed at 30 splines. Support the vehicle on stands before you work under it.
What’s included
Check the bearings, seals and hardware against your installation before starting.









