Overview
The G2 Axle and Gear 95-2021-004 is a rear replacement axle shaft for the GM 10 bolt 8.5 inch axle in 1988–1999 GM 1500 four-wheel-drive trucks with independent front suspension. It has 30 splines and takes 14mm press-fit wheel studs.
Forged alloy steel, heat treated beyond OEM specifications, this shaft is built for the added load of high-torque use. It works on either side of the rear axle.
It is made for four-wheel-drive trucks with independent front suspension. The 14mm press-fit studs are not included. Chevrolet and GMC versions end in different years, so confirm the model year before ordering. The shaft is forged from alloy steel.
Key features
- 30 splines
- 14mm press-fit wheel studs
- Either driver or passenger side
- 4WD IFS trucks
- GM 10 bolt 8.5 inch rear axle
- Wheel studs not included
Stud fitment and hub work
Press-fit studs need to be seated correctly in the hub flange, and the old studs are often the first thing to check when a shaft is changed. If the old studs are worn, bent or spun in their holes, replacing them with new press-fit studs is a practical step while the hub is accessible. Use a proper press or hub tool, because hammering studs in can damage the flange and the bearing behind it.
On independent front suspension trucks, the rear shaft is the component most often replaced after a driveline problem. Make sure the front axle is working correctly and that the rear differential fluid is clean before fitting new hardware, since contamination can shorten the life of a new shaft and bearing.
- Inspect the hub flange before fitting the new shaft
- Keep the stud threads clean and free of corrosion
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 95-2021-004 |
| UPC | 631410106046 |
| Product type | Replacement axle shaft |
| Axle type | GM 10 Bolt 8.5 inch |
| Axle location | Rear |
| Shaft position | Driver Or Passenger |
| Spline count | 30 |
| Press-fit wheel stud size | 14mm |
| Wheel studs | Not included |
| Stated application | 1988-1999 GM 1500 4 WD IFS |
Vehicle fitment
The 95-2021-004 fits the 1988–1999 Chevrolet K1500 and the 1988–1998 GMC K1500.
The GMC list ends one year earlier, at 1998. The shaft is for the four-wheel-drive K1500 trucks, not the two-wheel-drive C1500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- The 14mm studs are not included and must be supplied.
- Make sure your truck has independent front suspension, as G2 states.
What’s included
One rear axle shaft that fits either side (95-2021-004).
Not included: 14mm wheel studs for the 95-2021-004.











