Overview
The G2 Axle and Gear 2-2021-273 is a 2.73 ratio ring and pinion for GM 10 Bolt 8.5 inch axles. The pinion turns 2.73 times per ring gear revolution, which keeps engine speed low at highway speed.
The set fits the 8.5 inch and 8.6 inch 10 Bolt ring gears in both front and rear locations. It is built for oversized tires and high-performance engines. Confirm the ring gear diameter and axle location before ordering.
Key features
- 2.73 gear ratio for GM 10 Bolt 8.5 inch axles
- Ring gear sizes of 8.5 inch and 8.6 inch
- Fits front and rear axle locations
- Ring gear and pinion supplied as one set
- Built for oversized tires and high-performance engines.
Front and rear fitment checks
On an 8.5 inch 10 Bolt, the ring gear diameter and axle location are the two measurements that decide whether a 2.73 set belongs in the housing. Count the ring gear teeth and measure the ring diameter, then compare the result with the axle location on your vehicle. A front and a rear housing can look alike, so mark the axle before pulling the gears.
A 2.73 ratio is a numerically low gear. It suits highway driving with stock or modest tires, since engine speed stays low at cruise. Drivers who tow or run larger tires often prefer a numerically higher set for that reason. Keep the old gear set and any carrier shims until the new set is fitted, and inspect the carrier case for cracks before reassembly.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2021-273 |
| UPC | 631410105599 |
| Axle type | GM 10 Bolt, 8.5 inch or 8.6 inch ring gear |
| Axle location | Front or rear |
| Gear ratio | 2.73 |
| Axle manufacturer | GM |
Vehicle fitment
Verify the ring gear and axle location on your vehicle before ordering. This 2.73 set is made for GM 10 Bolt 8.5 inch and 8.6 inch axles, front or rear. Measure the housing if it is not clearly one of those sizes.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear mesh on an 8.5 inch 10 Bolt has to be checked with the carrier installed, so a gear shop is the usual installer. Break the set in gradually before towing.
What’s included
One 2.73 ring and pinion set for GM 10 Bolt 8.5 inch axles, part number 2-2021-273.
Not included: Carrier bearings, shims and installation hardware are not included with the 2.73 set and may need separate purchase.
















