Overview
The G2 Dana 44 4.27 Ratio Ring and Pinion, part number 2-2033-427, is a 4.27-ratio gear set for Dana 44 front or rear axles. It is part of G2’s ring and pinion line.
G2 says these sets use the latest technology and materials and are made to hold up under oversized tires and high performance engines.
Key features
- 4.27 gear ratio
- Front or rear Dana 44 axle location
- Made from computer heat-treated 8620 steel.
Carrier and setup checks
A 4.27 ratio changes the relationship between the pinion and ring gear, so the carrier and bearing preload should be checked as a set. Gearing this close to stock on some trucks may feel more responsive off the line, while a different tire size can shift that feel. Measure your tires and compare the rolling diameter before you choose a ratio.
Pinion depth and backlash are the core adjustments, and they are sensitive to small changes. Ask the shop to check the contact pattern with marking compound and to confirm bearing preload before the axle returns to service. Recheck the mesh after the first short runs, since settling is normal during early use.
- Measure the carrier and bearing setup
- Check the contact pattern with marking compound
- Confirm bearing preload before reassembly
- Recheck mesh after early use
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2033-427 |
| UPC | 631410093995 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Gear ratio | 4.27 |
| Gear material | Computer heat-treated 8620 steel |
Vehicle fitment
It is for Dana 44 front or rear axles, with no single vehicle attached. Check your axle and carrier first.
Installation notes
Confirm the carrier and pinion settings are correct for a 4.27 ratio, and have the gears set up before the axle sees regular use.
















