Select your vehicle

Dana Spicer Performance Front Driveshaft with Flanged Yoke – 10020345

Dana Spicer

$573.96In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 1:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana Spicer Performance front driveshaft with flanged yoke, part 10020345
  • Tubes 50 percent thicker than factory
  • Small diameter design for added exhaust clearance
  • Bolts to factory differential yoke, required transfer case flanged yoke included

Description

Overview

The Dana Spicer Performance Front Driveshaft with Flanged Yoke, part number 10020345, is a front driveshaft built for the Jeep Wrangler JK, with two- and four-door models listed. It bolts to the factory differential yoke and includes the transfer case flanged yoke the setup requires.

The tubes are 50 percent thicker than original equipment for added strength, and the small diameter design gives extra exhaust clearance.

Key features

  • Tubes 50 percent thicker than factory for added strength
  • Small diameter design for additional exhaust clearance
  • Bolts to the factory differential yoke
  • Required transfer case flanged yoke included

Front driveshaft installation tips

A front driveshaft sits between the transfer case and the front differential, so its angles change with suspension travel and steering. Before pulling the old shaft, check the transfer case output yoke for wear and the front pinion seal for leaks. Replacing a worn yoke at the same time prevents a new shaft from carrying an old fault.

Thicker tubing adds strength at the cost of added rotating weight, so balance and runout matter. Smaller diameter tubing helps with tire and exhaust clearance in tight spots. After installation, check the bolt torque at both ends and inspect the U-joints after the first few trail runs.

  • Check transfer case output yoke wear
  • Inspect the front pinion seal for leaks
  • Re-torque yoke bolts after the first drive
  • Confirm clearance at full steering lock

Specifications

Brand Dana Spicer
Part number 10020345
UPC 23913454630
Position Front
Tube wall 50 percent thicker than factory
Tube diameter Small diameter design
Yoke Flanged, bolts to factory differential yoke
Body style 2 and 4-door

Vehicle fitment

It is a front driveshaft for the Jeep Wrangler JK (2007-2018), in two- and four-door models.

It is a universal fit part, so confirm your year, model and trim before ordering. Other Wrangler generations fall outside this shaft’s fit.

Installation notes

The shaft bolts to the factory differential yoke, and the required transfer case flanged yoke is supplied with it.

What’s included

The front driveshaft with flanged yoke and the required transfer case flanged yoke.

SKU: D/S10020345 Category:

Specification

Shipping weight 26.00 lbs
Package dimensions 39.00 × 8.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this Spicer driveshaft bolt to a factory differential?

Yes. It bolts to the factory differential yoke, and the required transfer case flanged yoke is included with the shaft. Check the yoke fit against your differential before installing.

How much thicker are the tubes?

The tubes are 50 percent thicker than original equipment components, which adds strength. Measure the factory tube wall if you need an exact comparison before ordering.

Which Wrangler generations does it fit?

The shaft is made for the Jeep Wrangler JK, which covers 2007 to 2018 vehicles. It is also a universal fit part, so confirm your year, model and trim before ordering.

Do front driveshaft upgrades usually need a new pinion seal?

Not always, but it is a good time to inspect it. The shaft must come off the front pinion yoke, so seal leaks show up quickly. Replacing a worn seal during the swap saves a second removal later.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon