Overview
The Rubicon Express drive shaft package is a front and rear driveshaft set for 4-door Jeep Wrangler Unlimited and Rubicon Unlimited models. It fits 2012 to 2017 JK Wrangler Unlimited and Rubicon Unlimited vehicles with a manual transmission, and 2007 to 2011 JK models with a manual or automatic transmission.
The shafts are Dana Spicer 1310 CV style driveshafts designed to replace the factory shafts on a lifted JK. They are built for daily driving and off-road use, and Rubicon Express recommends them for vehicles with 3.5 inches or more of lift.
Key features
- Dana Spicer 1310 CV style front and rear shafts
- Includes yoke flanges for the front and rear shafts
- 1310 U-joints
- Dynamically balanced to reduce driveline vibration
- Billet aluminum flange
- Available in lengths from 15.5 to 38.5 inches
- Recommended for vehicles with 3.5 inches or more of lift
Driveline angles after a lift
Lifting a JK changes the driveline angles, and the factory shafts were not set up for that change. Replacement shafts work best when the joint angles are checked once the lift is complete. A shop with driveline experience can measure the front and rear angles and confirm the U-joints operate within their range. Angles that run too steep often cause vibration at speed and wear joints faster than normal.
Transfer case output yokes and the pinion yoke should be inspected at the same time, because worn parts add play that a new shaft cannot correct. Check for grease at the caps, looseness at the flanges and any clicking on turns. Keep an eye on driveline alignment after off-road trips that include rocks or deep articulation.
- Measure driveline angles after the lift is installed
- Inspect yokes and U-joints when new shafts go in
- Re-torque flange bolts after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 700007978111 |
| Joint type | 1310 CV style |
| Length range | 15.5 to 38.5 inches |
| Body style | 4-door |
| Transmission | Manual for 2012–2017; manual or automatic for 2007–2011 |
| Slip yoke eliminator | Not required |
| Fitment type | Universal fit, front and rear |
Vehicle fitment
This package fits 4-door JK Wrangler Unlimited and Rubicon Unlimited vehicles from 2007 to 2011 and from 2012 to 2017.
2-door JK Wranglers are not part of this 4-door package. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Rubicon Express designs the shafts to run with its replacement yoke and flange for the transfer case. Driveshaft lengths are for factory gasoline engines.
What’s included
The package includes the front and rear drive shafts and the yoke flanges.













