Select your vehicle

G2 Dana 60 Ford F-350 Front Chromoly Axle Kit – 98-2034-004

G2 Axle and Gear

Shop Ford F-350 Replacement Axle Shafts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dana 60 front chromoly axle kit, 35 splines
  • SPL55-3X joint; full circle snap rings
  • Needs 35 spline aftermarket locking hubs (not included)
  • For Ford F-350 trucks with a Dana 60 front

Description

Overview

The G2 Axle and Gear 98-2034-004 is a Dana 60 front chromoly axle kit with 35 splines for Ford F-350 trucks from 1986 to 1997 that have the Dana 60 front axle.

Ford Super Duty-era owners who want stronger front shafts can use this 35 spline kit with the SPL55-3X joint. It is machined for full circle snap rings and expects 35 spline aftermarket locking hubs. G2 forges its chromoly axles from high tensile 4340 alloy and adds material at the yoke around the U-joint cap. Its application line reads: for use in 1986-1997 Ford F-350 with Dana 60 front.

A Dana 60 front that breaks a shaft can leave a Ford stuck on the trail, which is why owners upgrade to chromoly. This kit has 35 splines and an SPL55-3X joint. Locking hubs are a separate purchase and must be 35 spline aftermarket units. Check your truck’s build year against the fitment years before ordering.

Key features

  • Dana 60 front axle kit in chromoly
  • 35 splines
  • SPL55-3X joint
  • Full circle snap ring machining
  • Needs 35 spline aftermarket locking hubs
  • For F-350 trucks with a Dana 60 front

Ford-specific checks before installing

Fords with a Dana 60 front often have a history of heavy use, and the axle shafts are the weak link when a truck is pushed through rough terrain. Before installing new shafts, inspect the entire front end, including the hub seals, wheel bearings and the carrier pinion seal. Any sign of leaking grease or metal shavings in the carrier is a reason to address the problem first.

Hubs are the piece most likely to be overlooked. Because this kit requires 35 spline aftermarket hubs, a truck with factory hubs will not work until the hubs are replaced. Measure the splines and look at the hub style before buying, and keep the old hubs as a reference for the new order.

Running bigger tires means more torque through the front driveline. Owners who run larger rubber often add a locker or regear at the same time, and the shafts should be inspected after each season of hard use. Keep the joints greased, check the snap rings for wear, and retighten the axle nuts after the first few drives.

Specifications

Brand G2 Axle and Gear
Part number 98-2034-004
UPC 631410108361
Part type Front axle kit
Material Chromoly (4340 alloy)
Axle Dana 60
Axle location Front
Spline count 35 splines
U-joint SPL55-3X
Snap rings Full circle
Differential included None

Vehicle fitment

It fits Ford F-250 and F-350 trucks with a Dana 60 front, including the 1979 F-250, 1997 F-250 HD, and the 1979 and 1988–1997 F-350 models. Check your build year against the fitment years before ordering.

Other Ford trucks and any truck with a different front axle are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm that the truck has a Dana 60 front axle and 35 spline locking hubs, since the hubs must match the shafts. G2 does not supply hubs with the kit.

What’s included

Not included: 35 spline aftermarket locking hubs.

SKU: G/298-2034-004 Category:

Specification

Shipping weight 63.00 lbs
Package dimensions 37.00 × 7.50 × 7.30 in
brands

Fitment

VehicleYearsTrims
Ford F-2501979Custom, Ranger, Ranger Lariat, Ranger XLT
Ford F-250 HD1997XL, XLT
Ford F-3501979, 1988–1997Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLT, XLT Lariat

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What trucks does the G2 98-2034-004 fit?

It fits the 1979 F-250, the 1997 F-250 HD and the 1979 and 1988–1997 F-350 trucks, all with a Dana 60 front axle. Compare your build year with these years before ordering.

Are locking hubs included with the 98-2034-004?

No. The kit requires 35 spline aftermarket locking hubs, which are not included, so the hubs on the truck must be that type or bought separately.

What joint does the 98-2034-004 use?

An SPL55-3X joint, with shafts machined for full circle snap rings, so the joint and snap rings are meant to be used together as a matched set.

How many splines does the 98-2034-004 have?

It has 35 splines and is built for the Dana 60 front axle, so the locking hubs and other components need the same spline count.

Can factory hubs be used with this axle kit?

Not without a change. The kit requires 35 spline aftermarket locking hubs, so factory hubs need to be replaced before the shafts will fit. Confirm the spline count of the hubs on the truck before buying.

How often should the front shafts be greased or inspected?

Inspect the joints and boots after each season of hard use or any deep water crossing. Re-grease the joints when they show signs of dryness, and replace any boot that is torn to keep dirt out.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-350 Replacement Axle Shafts on Amazon