Overview
The G2 Dana 60 Chromalloy Inner Axle Shaft, part number 97-2034-007, is a front inner shaft for Dana 60 axles on the passenger side, with 35 splines. It is forged from high grade alloy steel and heat treated beyond OEM specifications.
G2 designs the shaft for high torque applications and says its rolled splines and better materials allow larger tires to be run with less risk of failure. The published fitment is Universal Fit, and no vehicle years or models are listed.
Key features
- Forged high grade alloy steel
- Heat treated beyond OEM specifications.
- Rolled splines and better materials
- Built for high torque and larger tires
Inner joint and differential side
The inner shaft connects to the differential side gear, so its spline end and the inner joint carry the drive torque into the axle. Dana 60 front axles are used in heavy-duty applications, and the inner end can be exposed to road debris and fluid leaks. Check the inner joint boot or seal area for damage whenever the axle is opened, since contamination can quickly wear the splines.
Removing an inner shaft involves the differential, so the work needs care to keep the gears aligned and the fluid level correct. Replacing the inner shaft together with the differential seal is a common step, because both parts are reached during the same job. Compare the spline count and end shape of the old part before installing the new one.
- Inspect the inner joint and boot area
- Check the differential seal during the job
- Confirm the spline count on the old and new shaft
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 97-2034-007 |
| UPC | 631410097337 |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle location | Front |
| Shaft location | Passenger side inner |
| Spline count | 35 splines |
| Material | Forged high grade alloy steel, heat treated |
| Fitment category | Universal Fit (as published) |
Vehicle fitment
Dana 60 identifies the axle this inner shaft is made for. No vehicle years or models are attached, so confirm the Dana 60 front axle and 35 spline count on your vehicle before fitting.
The outer stub shaft is a separate part number and is not covered by this inner shaft listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the spline count and the inner joint end of the old shaft against this one before installing. Removing an inner shaft from a Dana 60 front axle involves the differential side, so a mechanic experienced with front axles should perform the work.
What’s included
One inner axle shaft, passenger side.
Not included: Check hubs, bearings, seals and hardware against your installation before starting.








