Overview
The G2 Axle and Gear 1-2097-373 is a 3.73 ratio O.E.M. series ring and pinion for the rear axle. It is built for the Chrysler 10.25 inch AAM rear axle at a 3.73 ratio. A Dodge 10.5 inch 14 bolt housing is a different axle, so confirm the housing before ordering.
G2 says its O.E.M. series gears are designed to run cooler and quieter than aftermarket gears, and that the company contracted with original equipment manufacturers to make them. The 3.73 ratio gives more torque multiplication at the wheels than a 3.42 set.
Key features
- O.E.M. series 3.73 ring and pinion
- Rear axle location
- Chrysler 10.25 inch AAM axle type listed
- Built under contract with original equipment manufacturers.
- Designed to run cooler and quieter than aftermarket gears as an O.E.M. series set.
Matching a Chrysler AAM axle
Housing identity matters more than the ratio for this set. Carrier type, axle shaft spline count, and bearing style all vary between axle families, so a gear that meshes correctly can still be the wrong set for the housing. Measure or look up the axle tag before buying.
A 3.73 ratio raises engine speed at highway cruising and adds pulling force at the wheels, which suits heavier tires and towing. Ring and pinion gears are commonly replaced with new pinion bearings and a seal, and the carrier bearings should be checked for wear first. Fitment checks come before any gear work begins.
- Read the axle tag or axle code before ordering
- Confirm carrier type and ring gear diameter
- Replace pinion bearings and seal with the set
- Inspect carrier bearings for play
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 1-2097-373 |
| UPC | 631410093148 |
| Gear ratio | 3.73 |
| Axle location | Rear |
| Axle type | Chrysler 10.25 inch AAM |
| Popular axle manufacturer | Chrysler |
| Series | O.E.M. |
Vehicle fitment
No vehicle model or year is named for this 3.73 set. It is listed by axle type as the Chrysler 10.25 inch AAM, so match the housing and axle name before ordering.
This set is for the Chrysler 10.25 inch AAM only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, backlash and bearing preload on the 3.73 gears should be set by a driveline shop before the axle is put into service.
What’s included
A matched O.E.M. series ring and pinion for the rear axle.
















