Select your vehicle

FOX 2.0 Performance Series Coilover IFP Shock – 983-02-052

FOX

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front FOX 2.0 Coilover IFP shock absorber, part number FOX983-02-052
  • Fits the 2009–2013 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL and XLT models
  • Gas charged, direct-fit application
  • Valving can be matched to driving needs

Description

Overview

The FOX part FOX983-02-052 is a front 2.0 Coilover IFP shock absorber for the 2009 to 2013 Ford F-150. It fits FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL and XLT models.

FOX makes shocks in a broad range of sizes, and valving can be matched to a vehicle’s driving needs. Its designs offer several mounting options. This is a gas-charged coilover with a direct-fit design.

Check the body diameter, length and mount types against the original front unit before fitting.

Key features

  • Front position
  • Coilover shock type
  • Gas charged
  • Valving can be matched to the vehicle’s driving needs
  • Direct-fit application

Coilover setup and alignment

A coilover combines the spring and damper into one assembly, so spring rate, ride height and damping all change together. On a truck that carries heavier loads, the front coilover shares the work with the springs and control arms, so the whole front end should be inspected before fitting.

After installing a front coilover, have the alignment checked, since changes to spring height and mount position affect camber and caster. Gas-charged designs keep damping more consistent under heat, which matters on long off-road runs. Replacing worn ball joints and bushings at the same time helps the new unit work as designed.

  • Inspect ball joints before installation
  • Check spring height at each corner
  • Recheck mount torque after the first drives
  • Match valving to tire size and use

Specifications

Brand FOX
Part number FOX983-02-052
Series 2.0 Coilover
Position Front
Shock type Coilover
Charge Gas charged
Fitment type Direct fit

Vehicle fitment

It is a direct fit for the 2009 to 2013 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL and XLT models.

The list covers 2009 to 2013 F-150 models only, so 2014 and later trucks are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A coilover changes the front spring arrangement, so check the mounts and length against the original front shock and spring before fitting, and have the alignment checked afterward.

What’s included

One front coilover shock. Check the spring and mounting hardware against your installation before starting.

Fitment

VehicleYearsTrims
Ford F-1502009–2013FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the FOX983-02-052 fit a 2011 F-150 XLT?

Yes. The 2009 to 2013 Ford F-150 in XLT models is covered, so a 2011 F-150 XLT fits. Confirm the year, model and trim before ordering.

Is this a front or rear shock?

It is a front coilover shock. A rear shock needs a separate part, so confirm the position matches the vehicle before ordering. Check the mounts against the original front shock.

Is it gas charged?

Yes. The coilover design uses a gas charge, and the valving can be matched to driving needs. Compare the length and mounts with the original front shock before starting the install.

Do coilovers need extra maintenance?

Coilovers need the same checks as other shocks, plus a look at the spring and upper mount. Inspect for oil leaks, loose hardware and worn bushings at regular service intervals. Keep the spring seats clean and free of rust.

Can I add a coilover without changing the alignment?

Changing spring height usually affects alignment, so an alignment check is needed after installation. A coilover that alters ride height can change camber and toe. Have the front end measured once the new shocks are in place.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon