Overview
The Flaming River FR20005SS is a six-position tilt steering column for classic Chevrolet and Ford vehicles, including 1948–1956 Chevrolet trucks, the 1964–1966 Chevrolet El Camino, the 1953 Ford F-100 and the 1948–1952 Ford F1. It replaces a worn original column and is built to fit the stock dash panel.
Flaming River says its tilt columns are made from all-new components, with two tubes so the column lines up with a factory dash. Floor-shift versions come with stainless steel tilt and turn signal levers, a hazard knob, a GM 4-1/4 wiring connector and a canceling cam. Automatic versions add a gearshift lever, an illuminated gearshift indicator, a removable 12 position linkage arm for easier alignment, and a neutral safety switch.
Key features
- Six-position tilt steering column
- All new components
- Two-tube construction to fit the stock dash panel
- Stainless steel tilt and turn signal levers and hazard knob on floor-shift columns
- GM 4-1/4 wiring connector and canceling cam on floor-shift columns
- Automatic columns add a shift lever, lit gear indicator, removable linkage arm and neutral safety switch
Choosing an early column setup
Early truck columns often wear at the bushings, lever mounts and shift linkage. A worn column can cause play at the wheel, rough shifting or a column that will not sit flush with the dash. Before buying, confirm the column type you need, floor-shift or automatic, because the wiring, levers and linkage differ between the two.
Plan the ignition change early. Relocating the switch to the dash changes the wiring path, so route the harness away from the steering shaft and pedals. Sort the lock, mount and adapter parts before the column goes in, and check that the steering shaft clears the firewall and dash opening when the column is seated.
- Floor-shift and automatic columns use different linkage
- Test the signal and hazard switches before final assembly
- Check that the tilt lever moves freely through its positions
Specifications
| Brand | Flaming River |
|---|---|
| Part number | FR20005SS |
| Product | Tilt steering column |
| Tilt positions | Six |
| Construction | Two tubes, all new components |
| Wiring connector | GM 4-1/4 |
| Lever material | Stainless steel tilt and turn signal levers |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1948–1956 Chevrolet trucks, the 1964–1966 Chevrolet El Camino, the 1953 Ford F-100 and the 1948–1952 Ford F1.
Check fit against your year, model and trim before buying. Later Chevrolet and Ford trucks are outside this fit.
Installation notes
The column requires relocating the ignition switch to the dashboard along with a new lock and cylinder. A column dash mount and a Flaming River steering shaft must be used, and a 4-1/4 plug adapter kit is needed to connect the ignition switch.
What’s included
Floor-shift columns include stainless steel tilt and turn signal levers, a hazard knob, a GM 4-1/4 wiring connector and a canceling cam. Automatic-shift columns add a gearshift lever, an illuminated gearshift indicator, a removable 12 position linkage arm and a neutral safety switch.
Not included: Lock and cylinder, column dash mount, Flaming River steering shaft and the 4-1/4 plug adapter kit are separate parts.









