Overview
The Flaming River FR20118 is a plug adapter kit that contains a female plug supplied with terminals. The kit can be used to adapt an existing wiring harness so it mates with the Flaming River 4-1/4 connector used on Flaming River tilt columns.
The kit is built for Flaming River tilt columns. Confirm your column type before using it.
Key features
- Female plug for Flaming River tilt columns
- Supplied with terminals
- Adapts an existing wiring harness to the Flaming River 4-1/4 connector
- Flaming River part number FR20118 with UPC 70000429384
Wiring and terminal basics
A plug adapter lets an existing harness connect to a different connector without cutting the factory wiring. Each wire has to land on the correct terminal, so count the circuits on your harness and compare them with the connector layout before crimping anything. Work slowly, keep the wires labeled, and avoid pulling on the wire when seating a terminal.
Steering column wiring carries signal and power circuits that are sensitive to heat and vibration. Protect each joint with heat shrink or insulated sleeves, and secure the harness so it does not rub against the column when the tilt is adjusted. Recheck the connections after the first drives, since loose terminals can cause intermittent faults.
- Label each wire before disconnecting
- Seat each terminal fully
- Protect joints with heat shrink
- Secure the harness away from moving parts
Specifications
| Brand | Flaming River |
|---|---|
| Part number | FR20118 |
| UPC | 70000429384 |
| Type | Plug adapter kit |
| Plug | Female |
| Terminals | Supplied with terminals |
| Connector | Flaming River 4-1/4 connector |
| Labeled fitment | Universal Fit, per product information |
Vehicle fitment
The kit is designed for Flaming River tilt columns. Confirm your column is a Flaming River tilt column before ordering, and check your vehicle’s year, model and trim before ordering.
Confirm your column is a Flaming River tilt column before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Matching your harness wires to the kit terminals is up to the installer. Disconnect the battery before working on steering column wiring.
What’s included
The kit includes the female plug with terminals.
Not included: the wiring harness you are adapting.












