Overview
The Flaming River FR20005 is a tilt steering column with a 30 inch floor shift, designed to replace an older worn steering column. It includes new components and two tubes for fitting to a stock dash panel.
The column is a six-position tilt design made of paintable steel. Floor shift versions include stainless steel tilt and turn signal levers with a hazard knob, a GM 4-1/4 wiring connector and a canceling cam.
Key features
- Six-position tilt design
- 30 inch floor shift
- Paintable steel construction
- Stainless steel tilt and turn signal levers with hazard knob
- GM 4-1/4 wiring connector and canceling cam
- Bolt-on installation
Before you install a column
A steering column carries the wheel’s input to the steering gear, the turn signal switch and the ignition. When the column is worn, the wheel can feel loose, the tilt lock may slip and the ignition may be hard to turn. Replacing the whole column is often simpler than rebuilding a worn one, but the new unit has to line up with the dash, shaft and wiring that are already on the vehicle.
Before buying, look at the shaft, the dash opening and the wiring harness. Floor shift and automatic shift columns are different parts, so check the shifter setup first. Painted steel columns can be refinished after installation, but keep paint away from the switch openings and the wiring connector.
- Measure the dash opening and the existing shaft length
- Keep the wiring harness labeled before disconnecting
- Recheck the mounting bolts after the first few drives
Specifications
| Brand | Flaming River |
|---|---|
| Part number | FR20005 |
| UPC | 70000429361 |
| Shift type | 30 inch floor shift |
| Tilt positions | Six |
| Finish | Paintable steel |
| Wiring connector | GM 4-1/4 |
| Installation | Bolt-on |
Vehicle fitment
Verify the year, model and trim against your vehicle before placing the order.
Installation notes
The column must be installed with a column dash mount and a Flaming River steering shaft. The existing ignition switch must be relocated to the dashboard, and a 4-1/4 plug adapter kit is required to attach it to the column.
What’s included
A tilt steering column with stainless steel tilt and turn signal levers, a hazard knob, a GM 4-1/4 wiring connector and a canceling cam, for floor shift style columns.
Not included: Not included: the ignition lock and cylinder, sold as a separate part, plus the column dash mount, Flaming River steering shaft and 4-1/4 plug adapter kit, which are required for installation.









