Overview
The Fabtech K2164 is a 3-inch spindle lift for the 2001–2008 Ford Ranger, built for 2WD trucks with torsion bar front suspension. The front lift uses one-piece ductile iron spindles, and a 2-inch add-a-leaf system raises the rear.
The spindles raise the ride height by 3 inches over stock and are designed to keep a stock-like ride. Installation is a total bolt-on with no grinding or cutting of factory parts, and adjustable alignment cams allow the front end to be set. The maximum tire size is 32/11.50R15 on 15×7 wheels with a 3 3/4-inch backspace, and some loss of steering radius should be expected.
Key features
- 3-inch lift, range 3 to 4.99 inches
- One-piece ductile iron spindles
- Bolt-on installation with no grinding or cutting
- Adjustable alignment cams
- 2-inch add-a-leaf at the rear
- Maximum tire size 32/11.50R15
Steering and alignment notes
Spindle lifts change the steering geometry at the front, so alignment and steering feel are the first things to check. The adjustable cams on this kit let the caster and camber be set back to specification after installation. Because the stock steering arms and spindles are replaced, the steering radius shifts slightly, which is normal for this type of lift.
On older Rangers with torsion bar front suspension, the torsion bars and their adjusters can be worn, so inspect them before lifting. Wheel and tire choices affect rub and steering too. Wider or taller tires on a spindle lift need a clearance check against the inner fender and the steering linkage.
- Check torsion bar adjusters before the install
- Set the alignment once the new spindles settle
- Inspect tie rod ends and steering linkage for play
- Check wheel backspacing against brake and caliper clearance
- Recheck bolts after the first few drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2164 |
| UPC | 70000583627 |
| Lift height | 3 inches (range 3 to 4.99 inches) |
| Suspension type | Lift spindle |
| Drivetrain and front suspension | 2WD with torsion bar front suspension |
| Rear lift method | 2-inch add-a-leaf |
| Maximum tire size | 32/11.50R15 |
| Maximum wheel size | 15×7 with 3 3/4-inch backspace |
| Shocks |
Vehicle fitment
It fits the 2001–2008 Ford Ranger, including the Edge, Sport, Tremor, XL and XLT models.
It is for 2WD trucks with torsion bar front suspension, so 4WD trucks are not covered. Verify year, model and trim against your truck before buying.
Installation notes
The spindles bolt in without grinding or cutting. Some loss of steering radius is expected, and the alignment cams need to be set after the install.












