Overview
The Fabtech K1106DL is a 2-inch control arm kit built around a Uniball upper control arm system. The short description adds front Dirt Logic SS 2.5 coilovers and rear Dirt Logic SS shocks to the set.
Fit depends on the vehicle, so verify your truck’s year, model and trim before buying this kit.
Key features
- 2-inch lift
- Uniball upper control arm system
- Front Dirt Logic SS 2.5 coilovers
- Rear Dirt Logic SS shocks
Setting up a Uniball arm kit
A Uniball upper arm swaps the usual rubber bushing for a spherical joint, which gives more articulation and holds its angle under hard loads. That stiffness also means the joint carries more of the vibration a bushing would have absorbed, so it deserves steady attention. Grease the joint if a fitting is provided, and keep the dust boot intact to keep grit out of the bearing.
Tire fitment usually changes once the suspension is raised, so check clearance at full steering lock and full suspension compression before driving far. A lift can also shorten bump stop engagement and change the feel over bumps. Plan for a professional alignment and a look at the steering components while the vehicle is up on the lift.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1106DL |
| UPC | 700007588381 |
| Lift height | 2 inch |
| Upper control arms | Uniball system |
| Front shocks | Dirt Logic SS 2.5 coilovers |
| Rear shocks | Dirt Logic SS |
| Fitment type | Direct fit |
Vehicle fitment
Before buying, match your truck’s year, model and trim to the kit. Compare the upper arm mounts and coilover lengths with your existing parts before installing.
What’s included
The kit includes the Uniball upper control arms system, front coilovers and rear shocks. Gather your own mounting hardware and check the parts count before starting.









