Overview
The Fabtech K1132 is a 6-inch basic lift system with performance shocks for the 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500. It uses Fabtech’s independent front suspension design, which the company says is built for trucks running 35-inch tires.
The design has zero bump steer through the full suspension cycle and a near-stock turning radius. The lift is rated at 6 to 7 inches, and the rear is raised with a 5-inch block and U-bolt system.
Key features
- Independent front suspension design
- Zero bump steer through the suspension cycle
- Near-stock turning radius
- Heavy duty 1/4-inch steel crossmembers with OE style alignment cam pins
- Triple front differential mounts for vibration-free operation at highway speed
Front end geometry and tires
Independent front suspension changes how the front wheels respond as the truck moves over bumps and through turns. The aim of a design with little bump steer is to keep the wheels tracking straight when the suspension compresses and rebounds. A near-stock turning radius keeps parking and tight maneuvers close to how the truck drives from the factory.
Tires matter for this kind of lift. The system is built around 35-inch tires, so tire choice should follow that size and the load it carries. Check the upper and lower control arm bushings and the tie rod ends during regular service, since worn joints can affect steering feel and tire wear.
- Confirm tire size and load range before buying
- Inspect tie rod ends at each oil change
- Recheck alignment after tire size changes
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1132 |
| Shock series | Performance race series |
| Lift height range | 6 to 7 inches |
| Rear lift component | 5-inch block and U-bolt |
| Rear shocks | Performance shocks |
| Front shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2019–2026 Chevrolet Silverado 1500 in Custom, High Country, LT, LTZ, RST and WT trims, and the 2019–2026 GMC Sierra 1500 in Base, Elevation, SLE and SLT trims.
The list does not cover the Denali trims or the 2018 and earlier trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6-inch lift changes alignment and driveline angles. Have the alignment set after installation, and check the driveline angles while the truck is on the lift.
What’s included
Front IFS components, steel crossmembers and differential mounts, performance rear shocks and the rear block and U-bolt lift.










