Overview
The Fabtech K1000 is a 6-inch performance lift for the 2000–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, and for the 2007 Silverado 1500 Classic and Sierra 1500 Classic. The front uses one-piece ductile iron drop-down steering knuckles on 1/4-inch thick, high arched lower control arm crossmembers, and the rear uses a 5-inch block kit with an add-a-leaf.
The one-piece ductile iron drop-down steering knuckles and high arched crossmembers add ground clearance. The front differential sits in a cradle-style bracket on bushings set at the correct angle, so the factory front driveshaft stays in use without vibration on AutoTrac models. The stock upper control arms and steering center link stay in their factory positions and do not need to be removed.
Key features
- 6-inch lift height
- One-piece ductile iron drop-down steering knuckles
- 1/4-inch thick, high arched lower control arm crossmembers
- Cradle-style front differential relocation bracket
- Solid steel billet sway bar end links with urethane bushings
- Crossmember impact struts and torsion bar drop brackets
Ride and handling changes
A six-inch lift on a 1500 truck changes steering geometry, driveline angles and the length of the sway bar links, so the front and rear should be checked after installation. The drop-down knuckles and high arched crossmembers raise the front, and the relocated differential keeps the driveshaft working at a steady angle.
Taller suspension also raises the center of gravity. Expect more body roll in corners and more sway on uneven road surfaces, and allow for that when driving with a load. Performance shocks help control the extra movement, but they are only one part of the handling picture. Tires and wheel offset also play a part, since oversized tires can rub at full turn.
- Check the steering geometry after installation
- Inspect sway bar bushings for wear
- Look for rubbing at full steering lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1000 |
| UPC | 70000212316 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Front components | Ductile iron steering knuckles, high arched crossmembers, impact struts |
| Rear lift | 5-inch block kit and add-a-leaf |
| Skid plate | Differential skid plate included |
| Shocks | Performance shocks included |
| Tire and wheel fit | 325/65R18 on 18×9 with 5-inch backspacing, minor trimming |
Vehicle fitment
It fits the 2000–2006 Chevrolet Silverado 1500, the 2000–2006 GMC Sierra 1500 and the 2007 Chevrolet Silverado 1500 Classic and GMC Sierra 1500 Classic. The 2500 HD and 3500 models are not covered.
The list covers the 1500 trucks in those years only, and the 2500 HD and 3500 models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock upper control arms and steering center link are kept in place, so the install works around them. The impact struts and torsion bar drop brackets are part of the front lift, and the rear add-a-leaf is installed with the 5-inch block kit.
What’s included
Drop-down steering knuckles, high arched crossmembers, billet sway bar end links, the differential skid plate and relocation bracket, crossmember impact struts, torsion bar drop brackets, a 5-inch block kit, an add-a-leaf and performance shocks.









