Overview
The Fabtech K3086 is a 6-inch Basic lift kit with rear performance shocks for the 2019 to 2021 Ram 1500. The Basic system is one of two lift systems offered for the 2019 Ram 1500. The lift height range is 6 to 7 inches, and it covers Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star and Tradesman versions.
The Basic system keeps the factory coil-over shocks at the front, using coil-over spacers to gain height. Rear shock options include performance twin tube shocks. The kit is designed for tires up to 35 or 37 inches tall, and the replacement extended length ductile iron steering knuckles keep the factory electronic stability control working.
Key features
- 6-inch Basic system for the 2019 to 2021 Ram 1500
- Front coil-over spacers that use the factory coil-over shocks
- Performance twin tube rear shocks
- Extended length ductile iron steering knuckles
- Heavy duty 1/4-inch steel lower control arm crossmembers
- Integrated front differential skid plate
- Steel coil spring spacers at the rear that keep the factory springs
Basic versus Performance systems
Basic and Performance lift systems for the same truck differ mainly in what they do with the front shocks and springs. A system that keeps the factory coil-over shocks is usually simpler to install, while a system with replacement shocks gives more control over ride and damping. Pick the system that matches your driving, not only the height.
Electronic stability control depends on accurate steering and wheel speed inputs, so steering knuckle and bracket changes deserve a careful check. After any front-end work, confirm the stability warning light is off on a short test drive. Keep the factory coil springs in good condition, since sagging springs reduce lift and load capacity.
- Confirm the stability warning light goes off after installation
- Inspect factory coil springs for sag before lifting
- Recheck driveline angles at the new rear height
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABK3086 |
| Lift height range | 6 to 7 inches |
| Front shocks | Factory coil-over shocks retained |
| Rear shocks | Performance twin tube |
| Rear lift component | Steel coil spring spacer |
| Lower control arm crossmembers | 1/4-inch steel |
| Tire clearance | 35-inch or 37-inch tires |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2019 to 2021 Ram 1500 models in the Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star and Tradesman versions.
Ram 1500 models from 2018 and from 2022 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The replacement steering knuckles and coil-over spacers change front geometry, so a wheel alignment should follow the install. The rear spacers keep the factory coil springs, but the driveline angles should still be checked once the rear is at its new height.
What’s included
The kit includes the front coil-over spacers, the extended length ductile iron steering knuckles, the 1/4-inch steel lower control arm crossmembers, the integrated front differential skid plate, the steel rear coil spring spacers and the performance twin tube rear shocks.










