Overview
The Fabtech K1094 is a 6-inch Gen II basic lift for the 2016–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500 with factory MagneRide suspension. It is a front lift with knuckle suspension, and the rear uses lift blocks and U-bolts.
Shocks are not included, so the truck’s existing shocks stay in use. Confirm the fitment and the suspension type before ordering, and check tire sizes against your vehicle before starting.
Key features
- 6-inch basic Gen II system
- Knuckle suspension type
- Front lift for MagneRide trucks
- Rear lift blocks and U-bolts
- Lift height range 5 to 6.99 inches
Front lift and rear blocks
A knuckle suspension front lift changes the angle of the front wheels and the steering knuckle. The change is most noticeable at full steering lock and under braking, so the steering components should be checked after the truck has been driven for a short time.
Rear lift blocks shift the axle down and change pinion angle. Check the driveshaft for vibration and look at the U-bolts and axle pads during the first service. A pinion angle check helps reduce wear on the driveline.
Because shocks are not included, the existing shocks will need to be checked for length and mounting clearance. Worn shocks may bottom out sooner at a higher ride height, so an inspection before a trail trip is worthwhile.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1094 |
| UPC | 700007272921 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Position | Front |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Not included |
| Suspension requirement | Factory MagneRide suspension |
Vehicle fitment
It fits the 2016–2018 Chevrolet Silverado 1500 and the 2014–2018 GMC Sierra 1500.
The list does not cover the 2014 and 2015 Silverado 1500 or 2500 HD trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the factory suspension type before starting, because the kit is for MagneRide trucks. Check the package contents against your installation before starting.
What’s included
The Gen II basic front lift components and the rear lift blocks with U-bolts.
Not included: Shocks.









