Overview
The Fabtech K2008 is a 7.5-inch performance lift kit for the 1997–1999 Ford F-250 and the 2000–2003 Ford F-150, with a 2004 F-150 Heritage also listed. The front lift uses a crossmember and steering knuckle system, and the rear uses a block and U-bolt kit.
The crossmember and steering knuckle system comes from Fabtech’s four-wheel-drive independent front suspension systems. The factory upper control arm stays in the stock frame pocket and connects to a longer ductile iron spindle, while the lower control arm moves into the one-piece crossmembers. Smooth ride coil springs supply the extra height for tires up to 35 inches tall, and performance shocks are included.
Key features
- 7.5-inch lift height
- Front crossmember and steering knuckle system
- Extended length ductile iron spindle
- Smooth ride coil springs
- Rear 5-inch block and U-bolt kit
- Front and rear twin tube performance shocks
- Eccentric cams included
Front geometry after a lift
A front lift changes the angles of the steering and the axles, so the new height affects how the truck tracks and how the wheels sit under the fenders. Moving the lower control arm into a crossmember changes the load path, which is why the mounting hardware should be torqued to specification and rechecked after the first few drives.
Coil springs set the ride height at the front, and a taller stance usually makes the truck feel a little less planted in corners. Performance shocks help control that motion, and they work best when the springs and shocks are matched to the same load and tire size.
- Recheck the torque on crossmember and knuckle hardware after the first drives
- Watch for rubbing at full steering lock once the tires are mounted
- Inspect ball joints and tie rod ends at each oil change
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2008 |
| UPC | 70000224809 |
| Lift height | 7.5 inches |
| Front lift | Crossmember, steering knuckles and coil springs |
| Rear lift | Lift blocks with U-bolts, 5-inch block |
| Shocks | Front and rear twin tube performance shocks |
| Shock boots | Not included |
| Tire size | 315/70R17 with 17×8 wheels, 4-inch backspacing, minor trimming |
| Tire clearance | Up to 35-inch tall tires |
Vehicle fitment
It fits the 2000–2003 Ford F-150, the 2004 Ford F-150 Heritage and the 1997–1999 Ford F-250.
The list does not cover other F-150 or F-250 model years, or any Super Duty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minor trimming is needed with 17×8 wheels and 4-inch backspacing for the 315/70R17 tire, so check the fit before finalizing wheel and tire choices. The shock boots are not included.
What’s included
Front crossmember and steering knuckle components, extended length coil springs, the rear block and U-bolt kit, eccentric cams and performance shocks.
Not included: Shock boots.









