Overview
The Fab Fours Overland Rack Extension (JTOR-02-1) is a roof extension for the Fab Fours Overland Rack, made for the 2020–2026 Jeep Gladiator (JT). It adds rack length for carrying more gear on the roof.
The extension is built from 11 GA steel with an expandable design. It works as part of the rack system rather than as a standalone carrier. An extra cross member can be added to build a solid floor.
Key features
- Multiple mounting points for the rack
- Multiple tie-down points for cargo
- Integrated pod mounts
- Expandable design that works with the Overland Rack
- 11 GA steel construction
- Install it after the Overland Rack is in place.
Carrying loads on the roof
Roof loads change how a vehicle handles. Keep heavier items low and centered on the rack, and secure everything with the tie-down points rather than relying on friction. Lighter, bulky gear should be strapped down so it cannot shift in wind or over bumps, and any load should stay well inside the rack’s limits.
Check the rack after the first few trips with a new load and after rough tracks. Look for loose bolts, cracked welds, bent bars and worn tie-down points. Address any play in the mounts before carrying heavy gear, since a small movement at the mounts can grow into a bigger problem on washboard roads.
- Keep heavy items low and centered
- Use tie-down points rather than friction
- Recheck mounts after rough tracks
- Watch for wind noise and shifting loads
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFIJTOR-02-1 |
| Model number | JTOR-02-1 |
| Component | Roof extension for the Overland Rack |
| Material | 11 GA steel construction |
| Finish | Black, per product name |
| Origin | Made in the USA |
Vehicle fitment
It is made for the 2020–2026 Jeep Gladiator (JT) in the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
Jeep Wrangler (JL) and other models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the Overland Rack first, since the extension attaches to it. Plan the fitting, including the tools and hardware you will need, before you start.
What’s included
Check the package contents against your installation before starting, including the rack, hardware and extra cross member you may need.
Not included: the Overland Rack itself and the extra cross member needed for a solid floor.














