Overview
The Energy Suspension universal bump stop 9.9116G is a black button head bump stop for the rear of a vehicle. It is listed at H-1 in. high with a Dia. 2 in. diameter and comes as a set of 2 pc.
The button head design is intended for control arms, traction bars, axles and leaf springs. Urethane construction is designed to outlast standard rubber bump stops. Because it is a universal fit, it is not tied to one make or model.
Key features
- Button head style
- Urethane construction
- H-1 in. height
- Dia. 2 in. diameter
- Black finish
Button head bump stops
Button head bump stops have a rounded top that contacts the mating surface across a small, consistent area. That shape can help the stop settle without binding when the suspension moves through its range. Urethane construction is common for this style because it holds its shape under repeated compression, though the pad still needs periodic inspection.
When choosing a button head stop, focus on height and diameter first, then check the mounting point on your vehicle. The stop should seat square and not rock as the suspension cycles. If you change ride height with a lift or spacer, recheck the stop’s contact point, since the new geometry may bring the stop into use sooner than before.
- Confirm seating square and not rocking
- Recheck contact after changing ride height
- Inspect the urethane for cracks or flattening
- Keep mounting hardware tight
Specifications
| Brand | Energy Suspension |
|---|---|
| Product code | 9.9116G |
| UPC | 703639417361 |
| Style | Button head |
| Material | Urethane |
| Color | Black |
| Height | H-1 in. |
| Diameter | Dia. 2 in. |
| Quantity | 2 pc. |
| Position | Rear |
Vehicle fitment
Universal fit is stated, so this stop is not tied to one truck or car. Check the H-1 in. height and 2 in. diameter against your current stop to see whether it suits your mounting point.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Energy Suspension gives no separate installation steps for this button head stop. Confirm the stop sits square on its mounting surface before the suspension is loaded.









