Overview
This rear bump stop is made for control arms, traction bars, axles and leaf springs. It cushions shocks and struts as they reach full compression, helping prevent costly damage from bottoming out.
The line includes O.E.M. replacement styles, a smaller bullet-shaped snubber for control arms, and larger competition race styles. The race styles carry a reinforced metal plate welded to the mount, suited to track and off-road use.
Key features
- O.E.M. replacement style design
- Bullet-shaped snubber option for control arms
- Competition styles with a reinforced metal plate welded to the mount
- Direct fit listing
Matching the style
Rear bump stops come in more than one style, and the right one depends on where it mounts and how much travel the suspension has. A smaller bullet-shaped snubber suits tight spaces on a control arm, while larger race styles are built for heavier loading. Choosing by appearance alone can leave the stop hitting the wrong surface, so compare each option against the original location.
Mounting plate design matters as much as the stop body. A reinforced plate spreads load over a wider area and resists tearing when the suspension is pushed hard on rough ground. For a street vehicle that rarely reaches full compression, a standard style is usually enough, while a vehicle used on trails or at the track benefits from the stronger plate. Inspect welds and fasteners at each service.
- Measure the original stop before buying a replacement
- Match the mount type to the bracket on the axle or arm
- Use the reinforced plate style for hard off-road use
- Keep the stop clear of brake lines and shock bodies
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.9103G |
| UPC | 703639949411 |
| Type | Rear bump stop |
| Mount | Reinforced metal plate on competition styles |
| Fitment | Direct fit listed; no vehicle named |
Vehicle fitment
Match the stop to the mounting point on your control arm, traction bar, axle or leaf spring.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The O.E.M. replacement, bullet-shaped snubber and race styles differ in size and mounting plate, so choose the style that matches the mounting point before installing.
What’s included
Confirm the style and piece count against your installation before starting.









