Overview
This universal urethane bump stop is intended for control arms, traction bars, axles and leaf springs. Fit depends on the mount and clearance of your own suspension.
A bump stop cushions the suspension when it compresses fully. Urethane versions last longer and operate more efficiently than rubber originals, and this design helps avoid expensive suspension damage.
Key features
- Urethane bump stop positioned as an upgrade over O.E.M. rubber
- Universal application for control arm, traction bar, axle and leaf spring mounts
- Absorbs impact from a collapsing suspension
- Energy Suspension reports race track and off-road proof for the design
Mounting and clearance basics
Bump stops rarely fail suddenly. They usually wear down gradually, and the first sign is often a change in how the suspension lands at full compression. A stop that once cushioned the impact may begin to bang or bottom out, which suggests it is worn or no longer seated properly.
Clearance is the main concern with a universal stop. Check the space around the mount for brake lines, wiring, shock bodies and the axle housing. Confirm the stop sits square on the mounting surface and that its fasteners are snug before a test drive. Recheck the setup after a few drives, because fasteners can settle and the stop can shift slightly.
- Look for wear marks on the stop’s contact face
- Keep wiring and lines clear of the stop
- Tighten fasteners firmly and recheck them after a few drives
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.9121G |
| UPC | 703639417569 |
| Material | Urethane |
| Fitment | Universal fit |
Vehicle fitment
Fitment is universal. No vehicle, model year or chassis code is given, so this stop is not matched to a specific vehicle.
Check the mounting location and clearance against the suspension component you plan to fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Plan for separate fasteners if your mount requires them.









