Overview
The Energy Suspension universal bump stop 9.9109G is a black low profile competition style stop for the rear of a vehicle. It measures H-2.5 in. high, L-4.5 in. long and W-2.5 in. wide, and comes as a set of 2 pc.
Energy Suspension positions this design for control arms, traction bars, axles and leaf springs, and says competition styles have a reinforced metal plate welded to the mounting plate and molded in. Because the stop is universal, no specific make, model or year is named.
Key features
- Low profile competition style
- Black finish
- Reinforced metal plate in the competition design, per the brand
- Height, length and width dimensions listed
Choosing a competition style stop
Competition style bump stops are built for vehicles that cycle through long, rough suspension travel. A low profile body keeps the stop compact while still limiting how far the axle or control arm can drop. The metal plate inside the molded pad helps the stop hold its shape under repeated hard hits, which is why this type is often chosen for off-road setups.
Before buying, compare the stop’s height, length and width with the space available on your bracket and the travel your suspension actually uses. A stop that is too tall can prevent the suspension from reaching full compression, while one that is too short may let the shock bottom out. Check clearance between the tire, frame and stop at full compression after installing it.
- Compare height, length and width with your bracket
- Check clearance at full compression
- Inspect the metal plate for bends or cracks
- Replace bump stops in pairs for even wear
Specifications
| Brand | Energy Suspension |
|---|---|
| Product code | 9.9109G |
| UPC | 703639417095 |
| Style | Low profile competition |
| Color | Black |
| Height | H-2.5 in. |
| Length | L-4.5 in. |
| Width | W-2.5 in. |
| Quantity | 2 pc. |
| Position | Rear |
Vehicle fitment
No vehicle is named for this universal stop, so fitment depends on the bracket and the height, length and width shown above. Compare those dimensions with your existing mounting setup before deciding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The competition style uses a metal plate welded to the mounting plate, so confirm that plate sits flat against your mounting surface before tightening. No other installation steps are provided.









