Overview
The Energy Suspension universal bump stop 9.9101R is a red, all purpose urethane bump stop for the rear of a vehicle, with a height of H-2 1/8 in. and a 2 in. diameter. Energy Suspension markets it for control arms, traction bars, axles and leaf springs.
Urethane is a tough elastomer used for bump stops, and this stop is made from it for rear suspension use. It is a general purpose design for control arms, traction bars, axles and leaf springs. Because it is a universal fit, it is not tied to one make or model.
Key features
- All purpose design in red
- Urethane construction
- H-2 1/8 in. height
- Dia. 2 in. diameter
- Urethane construction is designed to last longer than standard rubber stops.
Signs the stop is worn
A rear bump stop works at the end of suspension travel, catching the axle or control arm before it strikes the frame or body. Over time the pad can flatten, split or crumble, and a stop that no longer sits square on its bracket will not cushion properly. Look for cracks along the edges, a stop that has shrunk in height, or metal contact marks where the pad used to sit.
When replacing one, consider the stop’s height as well as its shape, because the travel it allows depends on the bracket and ride height. Stops are often replaced in pairs so both sides wear evenly and feel the same on the trail. Check the bolts or retaining hardware at the same time and tighten them to the level given in your vehicle’s service information.
- Cracks, splits or crumbling edges
- Flattened pad or reduced height
- Stop no longer seated square on its bracket
- Loose or corroded retaining hardware
Specifications
| Brand | Energy Suspension |
|---|---|
| Product code | 9.9101R |
| UPC | 703639416678 |
| Style | All purpose |
| Material | Urethane |
| Color | Red |
| Height | H-2 1/8 in. |
| Diameter | Dia. 2 in. |
| Quantity | 2 pc. |
| Position | Rear |
Vehicle fitment
It is a universal fit, so it is not tied to one vehicle. Compare the H-2 1/8 in. height and 2 in. diameter with your existing bracket to judge whether it suits the mounting point.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing stop’s height and diameter against H-2 1/8 in. and 2 in. before fitting. Confirm the stop seats fully on the bracket before loading the suspension.












