Overview
The Detroit Locker 187SL199A is an automatic locker for a Toyota 8.4 inch rear axle with 30 splines. Eaton makes the unit under the Detroit Locker brand. The axle type is Toyota Tacoma.
Like other Detroit Lockers, it drives both rear wheels together under power and lets them turn at different speeds when needed. It is designed for traction in mud, snow, rocks and on the track.
Key features
- Delivers torque to both rear wheels
- Automatic speed differentiation when needed
- 30 spline Toyota 8.4 inch application
- Eaton describes off-road traction in mud, snow and rocks
- Automatic locker differential type
Driving with an automatic locker
An automatic locker changes how the rear axle behaves on the road. Under power it locks both wheels together, which helps on loose or uneven ground. On pavement, especially in tight turns, the rear may hop or chatter as the wheels work against each other, and mismatched tire sizes make this more noticeable.
Keeping tire diameters matched and avoiding hard throttle in sharp turns on dry pavement helps reduce wear and noise. Because the locker is part of the drivetrain, check the rear gear oil and inspect the axle for leaks after installation and after rough use.
- Keep tire diameters matched on both rear wheels
- Avoid hard throttle in tight turns on pavement
- Check gear oil level after installation
- Inspect the axle for leaks after rough use
Specifications
| Brand | Detroit Locker |
|---|---|
| Manufacturer | Eaton |
| Part number | 187SL199A |
| UPC | 70000336326 |
| Axle manufacturer | Toyota |
| Axle location | Rear |
| Axle type | Toyota Tacoma |
| Axle spline count | 30 splines |
| Differential type | Automatic locker |
Vehicle fitment
The axle is an 8.4 inch rear with 30 splines, named as Toyota Tacoma. Check the axle size and spline count on your truck before installation.
A Toyota axle with a different size or spline count is not the match named here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing this locker means opening the rear carrier and setting ring and pinion mesh and preload. A shop with Toyota axle experience is a sensible choice for this work. Break-in of new gears is typically needed, so follow standard break-in practice. Secure the vehicle on stands before starting.
What’s included
The automatic locker unit, part number 187SL199A, is the item. Check the package contents against your installation before starting, including the carrier and hardware.






