Overview
The Detroit Locker 913A609 is a TrueTrac limited slip differential for a front Toyota 8-inch axle identified for 4-cylinder models, with 30 splines. Eaton is named as the manufacturer.
It shifts torque by gears only, with no clutch packs, so the front wheel with grip gets power when the other front wheel slips.
Key features
- Gear driven, clutchless limited slip
- Front axle position
- Toyota 8-inch axle, 30 splines
- Identified for 4-cylinder models
- No clutch packs to wear
Front axle care
A front limited slip splits torque between the front wheels, which matters most on loose surfaces and steep grades where one wheel can lose contact. Gear-driven units do not use clutch packs, so their behavior stays consistent as they age. Front steering and CV joints are often inspected alongside the differential, since both carry load when the front wheels turn and grip.
Keep front tire sizes matched and check tire pressure, because uneven diameters load the front gearing during turns. Front differential fluid should be changed on schedule and inspected for metal. If you hear grinding or clicking under throttle, have the front end checked before driving on rough terrain.
- Listen for clicking on tight turns
- Check front seals for leaks
- Match tire diameters side to side
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A609 |
| UPC | 70000372209 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Front |
| Axle type | Toyota 8 inch |
| Axle manufacturer | Toyota |
| Axle spline count | 30 splines |
| Engine identified | 4 cylinder |
Vehicle fitment
No model years are given. The unit is identified by a front Toyota 8-inch axle for 4-cylinder models with 30 splines. Confirm the front axle size and spline count before ordering.
This front identification does not cover rear axles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front limited slip units need correct gear setup and bearing preload, so a qualified differential installer should handle the job. Secure the vehicle on stands before working near the front axle.
What’s included
Check the package contents against your installation before starting, including bearings, seals and carrier hardware.






