Overview
The Detroit Locker 162SL60A is an automatic locker for Dana 30 front axles with 27 splines, made by Eaton and branded Detroit Locker. A locker keeps both front wheels driving under load, so one wheel that loses grip in mud, snow or rocks does not cut power to the other.
The locker sends torque to both drive wheels and keeps them in a constant drive mode. When the wheels need to turn at different speeds, as in a corner, the unit allows that automatically. The axle types it fits are Dana 30 JK, Dana 30 Reverse, Dana 30 TJ and Dana 30 Standard.
Key features
- Delivers torque to both drive wheels at the same time
- Keeps both wheels in a constant drive mode under load
- Automatically allows wheel speed differentiation when required
- Automatic locker type for 27 spline Dana 30 front axles
- Eaton cites traction in mud, snow, rocks and on the track
Setup and preload for Dana 30
A Dana 30 front carrier with an automatic locker needs careful setup, because preload and gear contact decide how quiet and durable the assembly will be. Bearing preload should be set to the correct value during reassembly, and the ring and pinion should be checked for contact pattern. A technician who has worked with Dana 30 gearing will usually find the process familiar.
Front axle use adds steering and driveline angles to the picture. The locker can change how the front wheels respond in tight turns, so road testing at low speed is a good step after installation. Listen for steady noise, not a whine or clunk, and check the front driveshaft and joints for play.
Off-road, a front locker helps the vehicle keep moving when one wheel loses grip. Traction still depends on tires, pressure and driving line, so the locker is one part of the setup.
- Set bearing preload carefully
- Road test at low speed first
- Inspect front driveshaft joints for play
Specifications
| Brand | Detroit Locker |
|---|---|
| Manufacturer | Eaton |
| Part number | 162SL60A |
| UPC | 70000010130 |
| Axle manufacturer | Dana |
| Axle location | Front |
| Axle type | Dana 30 (JK, Reverse, TJ and Standard) |
| Axle spline count | 27 splines |
| Differential type | Automatic locker |
Vehicle fitment
It is matched by axle, not by vehicle year or model: Dana 30 front housings with 27 splines in the Dana 30 JK, Reverse, TJ and Standard axle types. Confirm the spline count and housing style before installation.
Axle type names such as Dana 30 JK or Dana 30 TJ describe the axle, not a verified vehicle year range, and other Dana 30 housings may differ in spline count or carrier style. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A locker changes how the axle carries load, so the carrier should be set up by a technician familiar with Dana 30 gearing. Check the ring and pinion ratio against the 3.54 down rating before fitting. This is not a bolt-in swap for most owners, because the carrier has to come out and the unit must be preloaded correctly.
What’s included
This is an automatic locker unit, part number 162SL60A. Check the carrier, ring gear and hardware you need before installation.






