Overview
The Detroit Locker 913A368 is a TrueTrac limited slip differential for Chrysler 9.25-inch rear axles with 31 splines. Eaton is named as the manufacturer, and the unit is a complete gear-driven assembly.
Torque is split between the rear wheels by gears rather than clutch packs, so there are no friction plates to wear. When one tire slips, power heads to the wheel that can still grip.
Key features
- Gear driven, clutchless limited slip design
- Sends torque to the rear wheel with grip
- No friction plates to replace
- Chrysler 9.25-inch rear axle with 31 splines
- Complete limited slip assembly
Daily driving with a gear locker
A gear-driven limited slip behaves differently from a clutch-type unit in everyday use. Because the torque split comes from the gearing itself, there is no clutch pack that slowly wears or needs adjustment. Many owners hear a light ratcheting noise during tight, slow turns on pavement, which is normal for this style and tends to show up with aggressive tread. Keep tire diameters matched from side to side, since a large difference loads the gearing and can cause extra wear over time.
Gear oil is the main maintenance item in the carrier. Fill to the correct level with a lubricant suited to limited slip gearing, and change it on the same schedule you follow for the rest of the drivetrain. Fine metal in drained oil is worth noting, and a carrier inspection is a sensible next step if it appears in more than a trace amount.
- Watch for whining that changes with road speed
- Note any clunk when moving from coast to drive
- Inspect the fluid at every oil change
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A368 |
| UPC | 70000328592 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Rear |
| Axle type | Chrysler 9.25 inches |
| Axle manufacturer | Chrysler |
| Axle spline count | 31 splines |
Vehicle fitment
No vehicle years or models are given beyond the Chrysler 9.25-inch rear axle identification. Confirm the axle size and 31-spline count on your current carrier before ordering.
Other Chrysler axle sizes and spline counts are not covered by this 9.25-inch, 31-spline identification. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear-type carriers need correct backlash and bearing preload, so choose an installer who sets up limited slip gearing regularly. Support the vehicle on jack stands and never rely on a jack alone while working underneath.
What’s included
Check the package contents against your installation before starting, since bearings, shims and install hardware may need to be sourced separately.






