Overview
The Detroit Locker 914A690 is a rear TrueTrac limited slip differential for Ford 9 Inch axles with 35 splines. TrueTrac units are all-gear designs with no clutch packs, so they rely on gears rather than friction plates to split torque. If one wheel slips, the unit sends power across to the wheel that has grip, which helps a Ford 9 Inch rear end pull out of a bind.
Eaton makes this TrueTrac, and part number 914A690 identifies the Ford 9 Inch version. Its UPC is 70000663394.
Key features
- All-gear TrueTrac design with no clutch packs
- Automatic power shift to the wheel with grip
- Built for Ford 9 Inch rear axle types
- 35 spline axle shaft count
Ford 9 Inch gear care
A Ford 9 Inch carrier is a heavy-duty platform, and the gearing in a TrueTrac style unit is what keeps the rear end working evenly. Since there are no clutch packs, care centers on the gears, bearings and seals rather than friction material. Regular inspection is the simplest way to catch small problems before they spread into the housing.
Good setup is the foundation. Confirm pinion depth and backlash, check tooth contact against a pattern guide, and verify bearing preload before the cover goes on. Axle shafts and retainers should be inspected whenever the carrier is out, since worn parts can allow play and uneven loading.
- Check the gear oil level at every service
- Inspect axle seals for weeping
- Verify bearing preload during installation
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 914A690 |
| UPC | 70000663394 |
| Axle location | Rear |
| Axle type | Ford 9 Inches |
| Axle spline count | 35 splines |
| Differential type | Limited slip assembly |
| Popular axle manufacturer | Ford |
Vehicle fitment
It is made for Ford 9 Inch rear axles with 35 splines. Match your housing and spline count before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Ford 9 Inch carrier change calls for ring and pinion setup, bearing preload and backlash checks. Those steps are best left to a shop with setup experience, and the gear mesh should be verified before the vehicle is driven.
What’s included
Ring gear, pinion, bearings and hardware may be needed for installation. Check what your build requires before ordering.







