Overview
The Detroit Locker 913A590 is a rear Dana 44 TrueTrac limited-slip differential with 30 splines, listed at a 3.92 up ratio. Power passes through the gears rather than clutch packs, so torque goes to the wheel with grip when one side starts to slip.
The clutchless design means there are no clutches to wear out. Compare the axle type, spline count and ratio with your truck before ordering.
Key features
- Clutchless, all gear driven construction
- Shifts torque to the non-slipping wheel automatically
- No clutches to wear out
- Rear Dana 44 axle with 30 splines
- 3.92 up ratio
Ring and pinion matching
Gear ratio decides how engine power turns into wheel torque and how the axle behaves at highway speed. A higher numerical ratio gives stronger acceleration and pulling power, at the cost of more engine speed on the highway. Because the ring gear and pinion are a matched pair, the ratio has to be right before the differential is installed. Mixing a carrier with a ring and pinion of a different ratio is not a shortcut.
When changing ratio, the pinion bearings, carrier shims and pinion depth all need attention. Installers usually check backlash and tooth contact before the axle goes back in. Tire size changes also shift the effective gearing, so a larger tire may call for a different ratio than the one the truck came with. Plan the gear set and carrier together rather than one part at a time.
- Confirm the existing ratio before ordering
- Replace pinion bearings during a gear change
- Check backlash and tooth contact
- Recheck gearing after a tire size change
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A590 |
| UPC | 70000345060 |
| Differential type | Limited slip assembly |
| Design | All gear driven, clutchless |
| Axle type | Dana 44 |
| Axle location | Rear |
| Axle spline count | 30 splines |
| Ratio designation | 3.92 up |
| Axle manufacturer | Dana |
Vehicle fitment
No vehicle years, makes or models are given. The stated axle is a rear Dana 44 with 30 splines and a 3.92 up ratio, so match those first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the ratio is 3.92 up, pairing it with the correct ring and pinion matters. A professional should verify the gear setup and run the unit in as the gear set requires.
What’s included
Confirm the included parts against your installation before starting.








