Overview
The Detroit Locker Dana 30 27 Spline 3.54 Down Front TrueTrac, part number 912A584, is a front limited slip differential for Dana 30 front axles with 27 splines and 3.54 Down gearing.
The TrueTrac is gear driven and clutchless, so power moves to the wheel with traction when the other wheel slips. The axle type field names several Dana 30 variants, so confirm the exact variant on your axle before ordering.
Key features
- Gear driven, clutchless limited slip
- No clutch packs to replace
- Front axle location
- Dana 30 axle family
- 27 axle splines
- 3.54 Down gearing
Front axle considerations
A front limited slip works the same way as a rear unit: when one front wheel loses grip, torque moves to the wheel with traction. On a front axle this can help the vehicle pull through loose or uneven ground, though steering feel can change under load. The gear driven design keeps the action tied to the gears rather than friction plates.
Front carrier swaps involve the steering and drive components, so check the hubs, axle shafts and bearings while the carrier is out. Confirm the Dana 30 variant before ordering, since variants differ in how they fit. Pinion depth, preload and backlash must be set correctly, and the tooth contact pattern checked before returning the vehicle to service. Note the setup measurements for later reference.
- Confirm the variant before ordering
- Inspect hubs and axle shafts during the swap
- Check steering feel after the first drive
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 912A584 |
| UPC | 70000372379 |
| Differential type | Limited slip assembly (TrueTrac) |
| Design | All gear driven, clutchless |
| Axle location | Front |
| Axle manufacturer | Dana |
| Axle type | Dana 30 variants |
| Axle spline count | 27 splines |
| Gearing | 3.54 Down |
Vehicle fitment
This unit is for Dana 30 front axles with 27 splines and 3.54 Down gearing. The axle family has several variants, and no vehicle model or years are named.
Match the variant and the 3.54 Down gearing to your front axle, since the axle family alone does not confirm fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front carrier swaps involve axle shaft removal, driveline checks and ring and pinion setup. An axle shop should confirm the variant and gear mesh before the vehicle returns to service.
What’s included
Check the package contents for hubs, axle shafts and bearings before installing, since only the differential assembly is covered.






