Overview
The Detroit Locker 187SL61A is an automatic locker for the Toyota 8 inch 4 Cylinder axle with 30 splines. Eaton makes it under the Detroit Locker name. It fits front or rear positions.
A locker drives both wheels on the axle at once, which keeps traction when one wheel slips in mud, snow or rocks. It lets the wheels turn at different speeds through corners. It delivers 100% of the torque to both drive wheels.
Key features
- Torque to both wheels on the axle at once
- Automatic speed differentiation
- 30 spline fit
- Front or rear axle listing
- Automatic differential type
Front and rear use
Fitting a locker at the front or the rear changes what the gear shop has to do. A rear install is often the first choice for trail use, while a front locker helps steering and drive on loose ground. Either way the carrier is opened, and ring and pinion mesh has to be set before the axle goes back together.
The 4 Cylinder version of the Toyota 8 inch axle needs careful matching. Small differences in housing or gear set can look minor but affect how the locker engages. Confirm the version and spline count before ordering, then set the mesh and preload with the carrier out.
- Confirm the carrier cover bolt pattern
- Check the axle tubes for seepage
- Replace the pinion seal during the install
- Keep spare fluid for the first service
Specifications
| Brand | Detroit Locker |
|---|---|
| Manufacturer | Eaton |
| Part number | 187SL61A |
| UPC | 70000010115 |
| Axle manufacturer | Toyota |
| Axle location | Front or rear |
| Axle type | Toyota 8 inch |
| Axle spline count | 30 splines |
| Title variant | 4 Cylinder |
| Differential type | Automatic locker |
Vehicle fitment
The match is the Toyota 8 inch axle with 30 splines, in the 4 Cylinder version. Measure the axle and count its splines before installation, and check the year, model and trim against your truck.
The other Toyota 8 inch listing is a separate part number, 187SL61B, so match the title to your truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting front or rear means working in the axle carrier, so ring and pinion mesh and bearing preload should be set with a gear shop. Break in the new gears gradually. Keep the truck safely supported on stands during the work.
What’s included
The automatic locker unit, part number 187SL61A, is the item. Check the package contents for carrier, ring gear and hardware before starting the install.







