Overview
The Detroit Locker 225SL29A is an automatic locker for Dana 60 axles with 35 splines and a 4.56 up ratio. It mounts on the front or rear axle and sends drive torque to both wheels, which helps keep grip in mud, snow and rocks.
The locker unlocks to allow different wheel speeds through turns, then locks back under power. Eaton manufactures the unit under part number 225SL29A, so use that number when comparing Dana 60 lockers.
Key features
- Delivers 100% of the torque to both wheels
- Keeps both wheels in constant drive
- Automatic speed differentiation in turns when required
- 35 spline Dana 60 axle design
- Mounts on the front or rear axle.
Front axle lockers and steering
Fitting a locker to the front axle changes how the vehicle steers, because the wheels are driven and turned at the same time. Under power the locker keeps both front tires pulling, which can help climbing and loose-surface grip. Expect some steering effort change on pavement, and check the steering components after installation.
Front installations also involve the axle shafts and CV joints, which carry the load to the wheel hubs. Inspect these parts when the axle is open and replace any with play or damaged boots. A gear shop can set the ring and pinion for the front carrier.
- Check CV joints and boots when the axle is open
- Inspect steering components after installation
- Confirm ratio before choosing front or rear
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 225SL29A |
| UPC | 70000010121 |
| Manufacturer | Eaton |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle location | Front, Rear |
| Axle spline count | 35 splines |
| Ratio listed | 4.56 Up |
| Differential type | Automatic locker |
Vehicle fitment
The 225SL29A is matched to Dana 60 axles with 35 splines and a 4.56 up ratio, mounted front or rear. No vehicle name, year or chassis code accompanies it.
Match the Dana 60 housing, 35 spline count and ratio to your axle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect professional setup for a gear-set locker and a break-in period after the first drives. Keep hands and tools clear of the axle when it is raised or supported.
What’s included
Check the package contents against your installation before starting.






