Overview
The Detroit Locker automatic locker, part number 162C56A, is built for a Dana 35 axle with 27 splines and a 3.54 up ratio. It is an automatic locker, so it sends torque to both drive wheels and lets them turn at different speeds when needed. No vehicle is named.
The locker keeps both wheels in a constant drive mode, which supports traction in mud, snow, rocks and on the track.
Key features
- Automatic locker that sends torque to both drive wheels
- Allows wheel speed differences when required
- 27 spline Dana 35 axle
- 3.54 up ratio
Automatic lockers on the trail
An automatic locker stays engaged whenever there is torque, so it can feel different from an open differential on pavement. Tight turns may bring a slight hop or tire scrub, which is normal for many lockers. Expect the vehicle to track differently at low speeds than it did before the upgrade.
Off-road, a locker helps when one wheel loses grip in mud, snow or rocks. Choosing tires with good sidewall strength and keeping tire pressure consistent helps the locker do its job. Recovery gear and careful line choice still matter, since a locker cannot create traction that the tires do not have.
Over time, watch for clicking or chattering in turns, which can signal a worn or damaged locker. Check the fluid for metal debris during axle service, since debris often shows wear before a failure happens.
- Check tire pressure before trail runs
- Listen for clicking during tight turns
- Look for debris in the gear oil
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 162C56A |
| UPC | 70000010117 |
| Axle manufacturer | Dana |
| Axle type | Dana 35 |
| Axle location | Rear and front |
| Axle spline | 27 splines |
| Differential type | Automatic locker |
| Ratio | 3.54 up |
Vehicle fitment
It is an axle-specific part for a Dana 35 axle with 27 splines and a 3.54 up ratio, and no specific vehicle is named. Check those figures on your axle before ordering.
Other Dana 35 spline counts and ratios won’t match this locker. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An automatic locker goes in the differential carrier, so professional installation and gear setup are recommended. Check the ring and pinion once the carrier is assembled.
What’s included
Bearings, carrier parts and fasteners should be sorted out before the carrier goes back together.







