Overview
The Detroit Locker 915A545 is a rear TrueTrac limited slip differential for GM 10.5 Inch 14 Bolt axles with 30 splines and 4.10 Down gearing. The design is all-gear and clutchless, so the unit transfers torque to the wheel with grip through gears instead of clutch packs.
Part number 915A545 identifies this rear GM 14 Bolt unit, and its UPC is 70000661370. Eaton is named as the maker on this product line.
Key features
- Designed for GM 14 Bolt 10.5 Inch rear axle types
- 30 spline axle count
- Gear-driven limited slip action
- 4.10 Down gearing
Gear setup basics
The gear ratio sets how fast the wheels turn for each mile of road speed, while the limited slip controls how torque is shared between them. When replacing gears or changing tire size, keep the ratio and carrier type matched so the drivetrain sees the load it was built for. Mismatched gearing can add heat and wear across the carrier.
A 14 Bolt carrier has a ring and pinion, bearings and a case that must all be set together. Backlash and bearing preload are not guesses; they are measured and adjusted with the right tools. Setup mistakes often show up as whine, chatter or early tooth wear, so a shop with gear experience is worth the cost.
After installation, check the cover for leaks and listen for unusual sounds on a test drive. Keep notes of the tire size and ratio you run, since future gear changes depend on them.
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 915A545 |
| UPC | 70000661370 |
| Axle location | Rear |
| Axle type | GM 14 Bolt 10.5 Inches |
| Axle spline count | 30 splines |
| Gearing (title) | 4.10 Down |
| Differential type | Limited slip assembly |
| Popular axle manufacturer | GM |
Vehicle fitment
Fitment depends on the axle, not a vehicle model. The axle type is GM 14 Bolt 10.5 Inches, so check the housing, spline count and gear ratio on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setup for a 14 Bolt carrier involves ring and pinion mesh, bearing preload and backlash, so a shop with gear setup experience should complete the work. Confirm the ratio against your tire size and existing gears before the vehicle is driven.
What’s included
The TrueTrac differential is identified by part number 915A545. Check the included items against your installation before starting, including whether a ring gear, pinion or bearings are needed.







