Overview
The Detroit Locker Land Rover 24 Spline 3.54 Gear TrueTrac, part number 912A383, is a rear limited slip differential for Land Rover axles with 24 splines and 3.54 gearing for the ring and pinion pairing.
The TrueTrac is gear driven and clutchless, so it sends power to the wheel with grip when one side loses traction. Only the brand name Land Rover is given, so confirm the axle model before ordering.
Key features
- Gear driven TrueTrac limited slip
- Clutchless operation with no clutches to wear out
- Rear axle location
- 24 axle splines
- 3.54 gearing
On the trail
Rear limited slip units earn their keep on loose or uneven ground. When one tire lifts over a rock or spins in mud, a limited slip sends torque to the tire that still has traction, which keeps the vehicle moving. A clutchless gear driven design has no clutch packs that need replacing, so its action depends on the gears and the lubricant rather than friction parts.
Off-road use puts extra load on the carrier, the pinion bearings and the axle shafts. Check fluid level and look for leaks after trail runs, and tighten any loose cover fasteners. Matching the spline count and gearing before installation avoids a mismatch that would keep the unit from seating, and an axle shop familiar with the axle family can confirm the setup.
- Check fluid level after each trail outing
- Inspect the pinion seal for leaks
- Retighten cover bolts after the first few runs
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 912A383 |
| UPC | 70000010086 |
| Differential type | Limited slip assembly (TrueTrac) |
| Design | All gear driven, clutchless |
| Axle location | Rear |
| Axle manufacturer | Other |
| Axle type | Land Rover |
| Axle spline count | 24 splines |
| Gear ratio | 3.54 |
Vehicle fitment
Fitment is not confirmed for a model or year. Land Rover is the only axle name given, so match the 24-spline count and 3.54 gearing to your axle.
Land Rover axles vary by model, so match the 24-spline count and the 3.54 gearing to your axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear carrier swap needs axle shaft removal and a ring and pinion setup check. Have an axle shop experienced with this axle family confirm the 3.54 ratio matches your current gears.
What’s included
The differential assembly is the only item covered. Check the package contents for ring gear and pinion before installing.






