Select your vehicle

Detroit Locker Toyota 8 Inch V6 TrueTrac – 913A610

Detroit Locker

Shop Detroit Locker Differential Parts on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear Toyota 8-inch axle for V6 models with 30 splines
  • Detroit Locker TrueTrac gear driven limited slip
  • Part number 913A610, UPC 91306100000
  • No model years given; confirm axle size before buying

Description

Overview

The Detroit Locker 913A610 is a rear TrueTrac limited slip differential for a Toyota 8-inch axle identified for V6 models, with 30 splines.

Gear-only operation means there are no clutch packs to wear, and torque shifts to the rear wheel with traction when the other wheel spins.

Key features

  • Rear axle limited slip
  • Gear driven, clutchless design
  • No clutch packs to wear
  • Toyota 8-inch axle, 30 splines
  • Identified for V6 models

Rear axle break-in and checks

After a rear carrier change, the first few drives tell you a lot. Gears that were set correctly run quietly under light load. Early whine or a faint click usually points to a setup issue rather than a bad part, so the carrier should be rechecked before extended use. Taking the first drives gently gives the gearing time to settle.

Routine care is simple but important. Change the rear gear oil on schedule, use a lubricant suited to limited slip carriers, and inspect the drained oil for metal. Axle seals and the cover gasket are the most likely leak points, so look under the rear after longer trips.

  • Recheck bolts after the first drives
  • Listen for changes in noise under load
  • Inspect axle seals at each oil change

Specifications

Brand Detroit Locker
Part number 913A610
UPC 91306100000
Manufacturer Eaton
Differential type Limited slip assembly, all gear driven
Axle location Rear
Axle type Toyota 8 inch
Axle manufacturer Toyota
Axle spline count 30 splines
Engine identified V6

Vehicle fitment

No model years are given. This unit is identified by a rear Toyota 8-inch axle for V6 models with 30 splines, so confirm axle size and spline count before buying.

A front axle is not covered by this rear V6 identification. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A rear limited slip carrier needs correct gear mesh and bearing preload, so have it set up by a qualified differential shop. Keep the vehicle fully supported on stands while the rear axle is apart.

What’s included

Check the package contents against your installation before starting, including bearings, gaskets and fasteners.

SKU: EAT913A610 Category:

Specification

Shipping weight 18.50 lbs
Package dimensions 9.50 × 8.00 × 8.00 in
brands

Questions & Answers

Is the 913A610 a rear axle limited slip?

Yes. It is identified for the rear with a Toyota 8-inch axle for V6 models and 30 splines, and it is a gear driven limited slip assembly.

Does the 913A610 fit my Toyota?

No model years or vehicles are named. Confirm your rear axle's size and 30-spline count, plus your year, model and trim, before ordering.

What is the UPC of the 913A610?

The UPC is 91306100000 and the part number is 913A610. Confirm the delivered contents against your installation needs, including gaskets, bearings and fasteners.

How often should a limited slip carrier be inspected?

Inspect it at every oil change and any time the vehicle starts making new noises. Look for leaks, check the fluid for debris, and listen for whine, clunks or chatter. Early attention keeps small setup issues from becoming gear damage.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Detroit Locker Differential Parts on Amazon