Overview
The Detroit Locker 225SL131A is an automatic locker for Dana 80 rear axles with 35 splines and a 4.10 up gear ratio. It delivers 100% of the engine torque to both rear wheels, so a Dana 80 fitted with this unit keeps both wheels pulling when one loses grip.
The locker releases the two wheels on turns, letting them run at different speeds, then re-engages for straight-line traction. Use part number 225SL131A when matching this locker to a Dana 80 rear housing.
Key features
- Delivers 100% of the torque to both rear wheels
- Keeps both wheels in constant drive
- Automatically lets wheels turn at different speeds when needed
- It is built with 35 splines for Dana 80 rear axles.
- Designed for mud, snow, rocks and track use
Matching gears to the locker
On a Dana 80 with a locker, the ratio and the pinion depth decide how the gears mesh under load. A 4.10 up ratio changes the engine speed at the wheels, so the axle must match the transmission and tire size. Mismatched gearing can make a vehicle strain at low speed or cause the carrier to run hot.
Installing the gear set requires careful preload and tooth contact checks, which is why a gear shop is usually the right choice. Check the axle shaft ends and the axle bearings while the carrier is out. A locker sends full torque through both shafts, so worn or twisted shafts are more likely to fail under load.
- Confirm ring and pinion ratio before buying
- Check pinion depth and tooth contact
- Inspect axle bearings and shaft ends
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 225SL131A |
| UPC | 70000010186 |
| Manufacturer | Eaton |
| Axle manufacturer | Dana |
| Axle type | Dana 80 |
| Axle location | Rear |
| Axle spline count | 35 splines |
| Ratio listed | 4.10 Up |
| Differential type | Automatic locker |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. It is matched to the Dana 80 rear axle with 35 splines and a 4.10 up ratio.
A Dana 80 is an axle designation, not a vehicle, so match the housing and gear ratio to your build. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Automatic lockers with 4.10 up gearing need professional setup for gear pattern and preload, along with a break-in period. Work underneath only with the vehicle supported on rated stands.
What’s included
Check the package contents against your installation before starting.







