Overview
The Detroit Locker 225SL29B is an automatic locker for Dana 60 axles with 35 splines and a 4.10 down ratio. Mounted on the front or rear axle, it sends the full torque of the drivetrain to both wheels, so traction stays even when one tire loses bite in mud, snow or on rocks.
When the vehicle turns, the locker lets the two wheels run at different speeds, then reengages for drive. The 225SL29A covers the 4.56 up ratio, so match the ratio to your gears.
Key features
- Sends 100% of the drive torque to both wheels
- Holds both wheels in constant drive
- Permits wheel speed differences automatically when required
- 35 spline Dana 60 design
- It mounts on the front or rear axle.
Tooth contact and preload
Gear-set lockers depend on precise tooth contact between the ring gear and pinion. When the contact pattern is off, the gears can whine or wear quickly, and the locker may not engage smoothly. Setting the pattern and bearing preload takes measurement and patience, which is why professional setup is the usual route.
Owners often plan a break-in period after installation, with gentle driving and no hard lock-up turns on pavement during the first stretch. Keep an eye on the gear oil level and look for leaks at the axle seals. Recheck the carrier bolts after the first few trips.
- Check tooth contact before the first drive
- Keep the gear oil at the required level
- Recheck the carrier bolts after break-in
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 225SL29B |
| UPC | 70000010125 |
| Manufacturer | Eaton |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle location | Front, Rear |
| Axle spline count | 35 splines |
| Ratio listed | 4.10 Down |
| Differential type | Automatic locker |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. It is for Dana 60 axles with 35 splines and a 4.10 down ratio, in front or rear positions.
Dana 60 names an axle, not a vehicle, so verify the housing and ratio on your rig. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A gear-set locker needs professional setup, including tooth contact and preload, followed by a break-in period. Keep the vehicle stable on rated stands during any work underneath.
What’s included
Check the package contents before starting the installation.







