Overview
The Detroit Locker 915A385 is a rear TrueTrac limited slip differential for Dana 60 axles with 35 splines and 4.10 Down gearing. The unit uses an all-gear design with no clutches, so torque moves between the rear wheels through gears alone, sending power to whichever side has traction.
Part number 915A385 identifies this rear Dana 60 unit, and Eaton builds it under the Detroit Locker name. Its UPC is 70000227495.
Key features
- Rear Dana 60 limited slip with 35 splines
- Gear-driven TrueTrac torque transfer
- No clutch packs to wear out
- 4.10 Down gearing
Gearing and carrier setup
Gear ratio shapes how a Dana 60 rear behaves on the road and on the trail. A 4.10 Down setup changes the balance between acceleration and cruising speed, so the ratio should suit the tires and driving style. Since the carrier must match the ring and pinion already in the housing, check the ratio before any other work begins.
Dana 60 housings are heavy-duty and often run large tires, which adds load to the gearing. Inspect the bearings, pinion seal and axle retainers during a carrier change. Set preload and backlash carefully, and fill with gear oil suited to limited slip carriers once setup is complete.
- Confirm ring and pinion ratio match
- Inspect axle bearings and retainers
- Check the pinion seal for leaks
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 915A385 |
| UPC | 70000227495 |
| Axle location | Rear |
| Axle type | Dana 60 |
| Axle spline count | 35 splines |
| Gearing (title) | 4.10 Down |
| Differential type | Limited slip assembly |
| Popular axle manufacturer | Dana |
Vehicle fitment
It is made for rear Dana 60 axles with 35 splines. Check your housing, spline count and gear ratio before installing it, and match year, model and trim to your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires removing the old carrier and setting gear mesh and bearing preload. Confirm the 4.10 Down ratio matches the ring and pinion in your axle before setup, and leave the work to a specialist shop.
What’s included
Ring gear, pinion, bearings and carrier hardware may be needed for your build. Check the delivered contents against your installation needs before starting.






