Overview
The Detroit Locker 187SL47A is an automatic locker for the AMC Model 20 axle, a 29 spline unit made by Eaton. It covers 3.07 and up gear ratios and fits front or rear positions.
The locker keeps both wheels on the axle driving at once when one tire loses traction, and lets the wheels turn at different speeds when the vehicle turns. It is intended for mud, snow, rock and track use.
Key features
- 100% of the torque delivered to both wheels
- Constant drive mode under load
- Automatic speed differentiation
- 29 spline AMC Model 20 fit
- 3.07 and up ratio range
Before you install
An automatic locker works without a driver switch. When one wheel begins to spin, the locker sends drive to the wheel that still has grip, and during tight turns it lets the wheels rotate at different speeds. That makes it practical for trucks and Jeeps that see loose surfaces, but it only performs well when the gear set underneath is healthy and correctly preloaded.
Because this unit sits inside the carrier, the rest of the axle matters. Worn ring and pinion gears, tired bearings or a leaking pinion seal should be dealt with before the locker goes in, since a new locker running on worn gears wears quickly. Many owners also replace the carrier bearings and cover gasket while the housing is open.
After the first few drives, check the cover bolts and look for oil seepage around the housing. Some ticking during tight turns is typical for automatic lockers, but a loud clunk or a rough pull under throttle points to a setup problem that should go back to the shop.
Specifications
| Brand | Detroit Locker |
|---|---|
| Manufacturer | Eaton |
| Part number | 187SL47A |
| UPC | 70000010114 |
| Axle manufacturer | AMC |
| Axle location | Front or rear |
| Axle type | AMC 20 |
| Axle spline count | 29 splines |
| Gear ratio range | 3.07 and up |
| Differential type | Automatic locker |
Vehicle fitment
Fitment is matched by axle type, AMC 20, rather than by vehicle year. Match your AMC Model 20 housing’s spline count and gear ratio to the 29 spline unit and the 3.07 and up range before installation.
It fits AMC 20 axles with 29 splines. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Work on the AMC 20 carrier should be done by a gear shop, including ring and pinion setup, backlash and bearing preload. Break in the new gears as the manufacturer advises. Support the axle securely and keep the wheels off the ground while working.
What’s included
The package covers the automatic locker, part number 187SL47A. Check the included items against your installation before starting.






