Overview
The Detroit Locker AMC Model 20 3.08 Up Rear TrueTrac, part number 912A579, is a rear limited slip differential for AMC Model 20 rear axles with 29 splines and 3.08 Up gearing for the ring and pinion pairing.
The TrueTrac is all gear driven and clutchless, so there are no clutch packs to service or replace. Power moves to the wheel with traction when the other wheel slips, which suits rear axles that see loose ground.
Key features
- Gear driven TrueTrac limited slip
- Clutchless design with no clutch packs
- Rear axle location
- AMC Model 20 axle type
- 29 axle splines
- 3.08 Up gearing
Gearing and carrier care
A limited slip on an AMC Model 20 axle helps keep traction on loose ground. Torque moves to the wheel that still grips, which can help the vehicle leave a soft spot. A clutchless gear driven design avoids friction packs, so routine work centers on the gears, bearings and lubricant.
Gearing matters for both performance and drivetrain wear. The 3.08 Up ratio has to match the ring and pinion, so compare it with the carrier before work begins. Bearings and preload should be checked when the carrier is opened, and the tooth contact pattern should be confirmed before the vehicle is used off road.
Carrier care is simple: keep the lubricant at the correct level, watch for leaks at the cover and pinion seal, and listen for whine or clunks after service. Address noise early before it damages the gears.
- Check lubricant level at regular service
- Watch for leaks at the cover and pinion seal
- Listen for whine or clunks after service
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 912A579 |
| UPC | 70000341651 |
| Differential type | Limited slip assembly (TrueTrac) |
| Design | All gear driven, clutchless |
| Axle location | Rear |
| Axle manufacturer | AMC |
| Axle type | AMC 20 |
| Axle spline count | 29 splines |
| Gearing | 3.08 Up |
Vehicle fitment
This unit is for AMC Model 20 rear axles with 29 splines and 3.08 Up gearing. No model or years are named, so confirm the axle details before ordering.
A carrier with a different spline count or gearing will not match this unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Carrier work includes axle shaft removal, ring and pinion setup and bearing preload. An axle shop familiar with AMC 20 housings should set backlash and the tooth contact pattern.
What’s included
Check the package contents for axle shafts, bearings and gaskets before installing, since only the differential assembly is covered.








